- No Items in Cart.
Grabit® Damaged Screw Remover Extractor Kit 2Pcs
Grabit® - Screw Extractor Kit, Removes Stripped-Out and Damaged Screws Quickly and Easily, Reusable, Number 2 to 14 (Pack of 1)
Reusable just clean off chips and lubricate
Removes stripped-out and damaged screws quickly and easily
Removes most screw types including Phillips, TORX®, square drive, Pozidriv® and most tamper-proof screws
For use in variable speed hand drills set in reverse
Burnishing:1. Insert remover end of GRABIT® directly into drill.2. Set drill in reverse (counterclockwise).3. Place burnishing end of tool into damaged screw; slowly clean inside screw head until smooth.Removing:1. Insert burnishing end of GRABIT® directly into drill; removing end is now showing.2. Maintain reverse setting (counterclockwise).3. Place remover end of tool into smooth screw head.4. Apply firm downward pressure; drill at very low speed.5. Remover end of GRABIT® will thread into the head and remove the screw.
NOTE: Burnishing tool end is not to be used to drill holes.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
ITEM# | DESCRIPTION | QTY |
63213 | Grabit® - Screw Extractor #2 , No.6 - No. 10 | 1 |
63214 | Grabit® - Screw Extractor #3, No.12 - No.14 | 1 |
Grabit® Damaged Screw Remover Extractor Kit 2Pcs
Screw Remover Set
No. 6 - No. 14
2
27111709
No
Description
Reusable just clean off chips and lubricate
Removes stripped-out and damaged screws quickly and easily
Removes most screw types including Phillips, TORX®, square drive, Pozidriv® and most tamper-proof screws
For use in variable speed hand drills set in reverse
Burnishing:1. Insert remover end of GRABIT® directly into drill.2. Set drill in reverse (counterclockwise).3. Place burnishing end of tool into damaged screw; slowly clean inside screw head until smooth.Removing:1. Insert burnishing end of GRABIT® directly into drill; removing end is now showing.2. Maintain reverse setting (counterclockwise).3. Place remover end of tool into smooth screw head.4. Apply firm downward pressure; drill at very low speed.5. Remover end of GRABIT® will thread into the head and remove the screw.
NOTE: Burnishing tool end is not to be used to drill holes.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Tech Specs
Grabit® Damaged Screw Remover Extractor Kit 2Pcs
Screw Remover Set
No. 6 - No. 14
2
27111709
No