- No Items in Cart.
Kent® Flex-E-6001 Seam Sealer with Turbo Mixer
Flex-E-6001 Seam Sealer with Two TM-3 Turbo Mixer, Off White, Liquid Form, 10fl.oz Cartridge (Pack of 1)
Welcome. Register now to see your pricing.
Close
Flex-E-6001 Seam Sealer with Two TM-3 Turbo Mixer, Off White, Liquid Form, 10fl.oz Cartridge (Pack of 1)
A high-strength, fast-curing and self-leveling seam sealer developed with Ford Motor Company. Recommended for roof-seam sealing of Aerostar, Bronco, Escort, Explorer, Villager and Windstar vehicles. Also used on drip rails and trunk opening seams on various other makes.
OEM Recommended Honda Approval No. 18-134; Acura Approval No. 18-070
Self-leveling no need for tooling or sanding
Work life repositioning time 15 minutes
Paintable and sandable in 60 minutes
Oven-bakeable 350°F (176°C)
Two hour full cure at 68°F (20°C)
100% solids
No VOCs
Excellent adhesion to many surfaces including bare metal*
OEM Approved Ford Tox No. Base 154691, Ford Tox No. Curative 179513, GM Approved 9984532 for in plant use
OEM Recommended Honda Approval No. 18-134; Acura Approval No. 18-070
High bond strength up to 1,470 PSI
*For best results always follow OEM recommendations for priming procedure
A high-strength, fast-curing and self-leveling seam sealer developed with Ford Motor Company. Recommended for roof-seam sealing of Aerostar, Bronco, Escort, Explorer, Villager and Windstar vehicles. Also used on drip rails and trunk opening seams on various other makes.
OEM Recommended Honda Approval No. 18-134; Acura Approval No. 18-070
Self-leveling no need for tooling or sanding
Work life repositioning time 15 minutes
Paintable and sandable in 60 minutes
Oven-bakeable 350°F (176°C)
Two hour full cure at 68°F (20°C)
100% solids
No VOCs
Excellent adhesion to many surfaces including bare metal*
OEM Approved Ford Tox No. Base 154691, Ford Tox No. Curative 179513, GM Approved 9984532 for in plant use
OEM Recommended Honda Approval No. 18-134; Acura Approval No. 18-070
High bond strength up to 1,470 PSI
*For best results always follow OEM recommendations for priming procedure