Welcome. Register now to see your pricing.

Close

  • Customer Service

    Customer Service

    866.837.9908
    Mon - Fri: 7:00am - 5:00pm CT

    Contact Us 

    FAQs

  • Quick Order

    Enter Items Below

Solid Die Drill Bit Carbide 3/16"

Solid Die Drill Bit, Carbide, 5/8" Flute Length, 3/16 x 2" (Pack of 1) 

Item#: 56263

Price: Log In

Standard Pack: 1   ea.

Ship Weight: 0.24

Usually Ships: Today

Quantity:
Check Stock
Add to List
California Prop 65 WARNING California Proposition 65: WARNING: Cancer and Reproductive Harm -  www.P65Warnings.ca.gov

• Produces chips without generating excessive heat
• Accurately sized holes are produced without annealing or softening the workpiece
• Reamer-type finishes are easily produced
• Two straight flutes
• Made in USA
• Designed to drill hardened steel in the Rc 50 – 65 range
• Both a production drill and a salvage or reclaim tool
• Drill through glass, all series of stainless steel, nickel alloys, ceramics or weldments
• Drill out broken drills and taps
• Can be used in a drill press or portable power drill
NOTE: The drill is intended to be run at 60 – 100 SFM. Carbide drills are normally run at double the speed recommended for high-speed steel drills with a slightly lower feed rate. Proper drilling speed and the appropriate feed rate must be calculated for the material being drilled.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

56263
Solid Die Drill Bit Carbide 3/16"
Fractional
Carbide Die Drill Bits
Carbide
Bright
3/16 "
0.1875 "
2
5/8 "
9/16 "
2 "
TD7DSX 0.1875 S1Z33 / 00.63 - 02.00
23241605
Yes

Description

• Produces chips without generating excessive heat
• Accurately sized holes are produced without annealing or softening the workpiece
• Reamer-type finishes are easily produced
• Two straight flutes
• Made in USA
• Designed to drill hardened steel in the Rc 50 – 65 range
• Both a production drill and a salvage or reclaim tool
• Drill through glass, all series of stainless steel, nickel alloys, ceramics or weldments
• Drill out broken drills and taps
• Can be used in a drill press or portable power drill
NOTE: The drill is intended to be run at 60 – 100 SFM. Carbide drills are normally run at double the speed recommended for high-speed steel drills with a slightly lower feed rate. Proper drilling speed and the appropriate feed rate must be calculated for the material being drilled.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Tech Specs

56263
Solid Die Drill Bit Carbide 3/16"
Fractional
Carbide Die Drill Bits
Carbide
Bright
3/16 "
0.1875 "
2
5/8 "
9/16 "
2 "
TD7DSX 0.1875 S1Z33 / 00.63 - 02.00
23241605
Yes

Restrictions

California Prop 65 WARNING California Proposition 65: WARNING: Cancer and Reproductive Harm -  www.P65Warnings.ca.gov
Back to Top