1/4" - 3/4" Cryonitride Spiral Fluted Step Drill - 3/8" Shank
(Pack of
1)
• Spiral flute design cuts near perfect holes faster with less burrs
• Special CryoNitride coating stays sharp longer and cuts more holes than other step bits
• Cryophase™ treated for additional life
• Flats on shank for sure grip
• Hole size laser engraved on each step
Specifications
• Tip Design: Split point
• Material: High Speed Steel
• Coating: CryoNitride™
• Hardness: 64Rc
• Coating Hardness: 3000HV
• Coating Heat Resistance: 1472°F/800°C
• Cryogenic Treatment: Cryophase™ thermal cycling cryogenic treatment
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Mounted Flap Wheel 1"
Couldn't load pickup availability
Abrasive Hand Pad Light Duty 6 x 9"
Couldn't load pickup availability
2" Grey Finger Disc - 120 Grit
Couldn't load pickup availability
Double End Drill Bit 5/32"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 7.5mm
Couldn't load pickup availability
Jobber Length Drill Bit HSS 1/4"
Couldn't load pickup availability
One-Handed Reciprocating Saw
Couldn't load pickup availability
345 Tool Steel TIG Wire 5/32"
Couldn't load pickup availability
HYFLEX® Cut Resistance Gloves
Couldn't load pickup availability
Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Rocker Molding Clip with Sealer Nylon Gray 12mm
Couldn't load pickup availability
Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Step Drill Bit 5/16 to 1-3/16"
Couldn't load pickup availability
3/16" - 7/8" Cryonitride Spiral Fluted Step Drill - 3/8" Shank
Couldn't load pickup availability
Step Drill Bit 5/8 to 1-3/16"
Couldn't load pickup availability
18" Locking Smooth Operator Clamp
Couldn't load pickup availability
Reinforced Mini Cut-Off Wheel 3"
Couldn't load pickup availability
Abrasive Hand Pad Commercial Grade 6 x 9"
Couldn't load pickup availability
Product Description
• Spiral flute design cuts near perfect holes faster with less burrs• Special CryoNitride coating stays sharp longer and cuts more holes than other step bits
• Cryophase™ treated for additional life
• Flats on shank for sure grip
• Hole size laser engraved on each step
Specifications
• Tip Design: Split point
• Material: High Speed Steel
• Coating: CryoNitride™
• Hardness: 64Rc
• Coating Hardness: 3000HV
• Coating Heat Resistance: 1472°F/800°C
• Cryogenic Treatment: Cryophase™ thermal cycling cryogenic treatment
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY80170030 |
|---|---|
| Type | Multi-Hole Step Drill Bits |
| Diameter | 1/4 to 3/4 " |
| Increments | 1/16 " |
| Shank Size | 3/8 " |
| Number of Hole Sizes | 9 |
| UNSPSC #: | 31191506 |
| TAA Compliant: | Yes |
| Weight: | 0.13 lb |
