54 Flux Cored Brazing Rod, 32" Length, 1/8" Diameter, Aluminum
(Pack of
2)
SKU:CW1857 Item#: CW1857
A selection of alloys for joining all types of aluminum.
Superior Advantages
• Products for joining and buildup
• Easy to apply
Flux-cored for all types of aluminum
Tensile Strength: 34,500 PSI
Application Temperature: 1,110°F (599°C)
Recommended Flux: F56 (if needed)
Typical Applications
• Aluminum frames
• Tubing and piping
• Ornamental aluminum
• Cast aluminum
Usage ProcedureBevel heavy sections to allow 100% weld metal penetration. Broadly heat area to be brazed with a large, soft and slightly carburizing flame to about 1,050°F (566°C). Warm the end of the rod and rub on base metal until flux flows freely. 54C will then begin to wet the base metal. Deposit the 54C to fill the joint. Flux residue may be removed with warm water and brush. If additional flux is needed, use F56 flux.
Frequently Bought Together
52 Aluminum/Zinc Bare Brazing Rod 1/8"
$0.00
Couldn't load pickup availability
53 Pot Metal Bare Brazing Rod 1/16"
$0.00
Couldn't load pickup availability
53 Pot Metal Bare Brazing Rod 1/8"
$0.00
Couldn't load pickup availability
22 Cast Iron Bare Brazing Rod 3/16"
$0.00
Couldn't load pickup availability
30 Copper and Steel Flux Coated Brazing Rod 3/32"
$0.00
Couldn't load pickup availability
30 Copper and Steel Flux Coated Brazing Rod 1/8"
$0.00
Couldn't load pickup availability
Wheel Opening Drive Rivet Aluminum 5/32"
$0.00
Couldn't load pickup availability
Front Bumper Specialty Nut Steel M4.2-1.41
$0.00
Couldn't load pickup availability
Bumper Fascia Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Light Weight Composite Wear Plates 36X4X13/64
$0.00
Couldn't load pickup availability
Acetylene Safety Cap Heavy Duty
$0.00
Couldn't load pickup availability
Round Soapstone Holder Heavy Duty
$0.00
Couldn't load pickup availability
Product Description
A selection of alloys for joining all types of aluminum.Superior Advantages
• Products for joining and buildup
• Easy to apply
Flux-cored for all types of aluminum
Tensile Strength: 34,500 PSI
Application Temperature: 1,110°F (599°C)
Recommended Flux: F56 (if needed)
Typical Applications
• Aluminum frames
• Tubing and piping
• Ornamental aluminum
• Cast aluminum
Usage ProcedureBevel heavy sections to allow 100% weld metal penetration. Broadly heat area to be brazed with a large, soft and slightly carburizing flame to about 1,050°F (566°C). Warm the end of the rod and rub on base metal until flux flows freely. 54C will then begin to wet the base metal. Deposit the 54C to fill the joint. Flux residue may be removed with warm water and brush. If additional flux is needed, use F56 flux.
Technical Specifications
| Item#: | CW1857 |
|---|---|
| Welding Process | Brazing |
| Type | Flux Cored |
| Diameter | 1/8 " |
| Length | 32 " |
| Tensile Strength | 34,500 PSI |
| Melting Temperature | 1560-2000 °F |
| Base Metal | Aluminum |
| Recommended Flux | F56 |
| UNSPSC #: | 23271804 |
| TAA Compliant: | Yes |
| Weight: | 2.5 lb |
