Spiral Point Hand Tap, High Speed Steel, 3 Flute, 1/4-28, 5/8" Thread Length
(Pack of
1)
SKU:61129 Item#: 61129
• Spiral point design has a left hand flute at the point to provide a positive rake and drive the chip ahead of the tap
• Shorter overall thread length minimizes drag after the first full thread
• Reduced neck provides clearance to prevent breakage and allows room for lubrication to reach cutting edge
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Three flutes stabilize starting direction to facilitate tapping straight holes
• Manufactured from high-speed steel
• Recommended for through holes in most materials
• Designed for tapping on machining centers
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
Couldn't load pickup availability
Scotch-Brite Roloc Bristle Disc 2"
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
Push-Type Retainer Nylon 16 x 19mm
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Bumper Radiator and Grille Drive Rivet 7mm Hole
Couldn't load pickup availability
Pilotdrive Cryotap 1/2"-13 Starter Hand Tap
Couldn't load pickup availability
Pilotdrive Cryotap 7/8"-14 Starter Hand Tap
Couldn't load pickup availability
HSS Spiral Point Hand Tap 7/16-14
Couldn't load pickup availability
4-Flute HSS Taper Hand Tap 12-24
Couldn't load pickup availability
HSS Left Hand Plug Tap 5/16-18
Couldn't load pickup availability
4-Flute HSS Plug Hand Tap M14 x 1.5
Couldn't load pickup availability
Utility Knife, Folding , 4" Closed
Couldn't load pickup availability
21-Piece, 1/4" Shank, 2" Hex Power Bit Set
Couldn't load pickup availability
Autobahn Ergo Magna EZ Crimper Ratcheting Terminal Crimper
Couldn't load pickup availability
Product Description
• Spiral point design has a left hand flute at the point to provide a positive rake and drive the chip ahead of the tap• Shorter overall thread length minimizes drag after the first full thread
• Reduced neck provides clearance to prevent breakage and allows room for lubrication to reach cutting edge
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Three flutes stabilize starting direction to facilitate tapping straight holes
• Manufactured from high-speed steel
• Recommended for through holes in most materials
• Designed for tapping on machining centers
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 61129 |
|---|---|
| Type | Fractional |
| Diameter | 1/4 " |
| Pitch | 28 |
| Flutes | 3 |
| Thread Length | 5/8 " |
| H Limits | GH2 |
| Material | HSS |
| Recommended Drill Size | No. 3 |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.03 lb |
