Pilotdrive Cryotap 5/8"-11 Starter Hand Tap
(Pack of 1.0)

CryoTool®

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Check Availability

Quantity

Frequently Bought Together

M2 Sheet Metal Hole Cutter 3/8"

No product placeholder

Jobber Length Drill Bit HSS 6.5mm

Steel Crimped Cup Brush 1-3/4"

Chem-Weld I Plastic Repair Adhesive Black 10fl.oz

Industrial Spray Paint Desert Sand

CryoBoost Cobalt Drill Bit, 15/64" Dia. W/Flats

Item#: DY83621564

Metric Indented Hex Head Bolt with 17mm Washer

Hex Head Sheet Metal Screw with 16mm Washer Steel

Waterproof Work Aqua Light 66 LED

Item#: DY80000105

Pilotdrive Cryotap M16 x 1.5 Starter Hand Tap

Item#: DY80636025

Pilotdrive Cryotap 7/16"-14 Starter Hand Tap

Item#: DY80635015

HSS Spiral Point Hand Tap 3/8-24

Cryo-Drap #12-24 Drill & Tap Combo, 135o Split Point, W/Flats

Item#: DY80244415

4-Flute HSS Taper Hand Tap 8-36

3-Flute HSS Plug Hand Tap M2 x 0.4

Blade Disposal Container

18" Locking Smooth Operator Clamp

Item#: DY89840518

Zirconium Grain Locking Grinding Disc 2"

Product Description

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Technical Specifications

Item#:	DY80635021
Type	Fractional
Diameter	5/8 "
Pitch	11
Flutes	4
Thread Length	1-3/32 "
H Limits	H3
Overall Length	3-13/16 "
Recommended Drill Size	17/32 "
UNSPSC #:	23241615
TAA Compliant:	No
Weight:	0.175 lb

Product Restrictions

Suggested Products

Spot Weld Remover Drill Bit HSS 2-13/16(M8)

Sheet Metal Drill Bit Alloy Steel 1/8"

Spot Weld Remover Drill Bit HSS 1/4" (M6)

Spot Weld Remover Drill Bit HSS 3/8" (M10)

Abrasive Hand Pad All Purpose 6 x 9"

Sheet Metal Drill Bit Alloy Steel 1/4"

Twist-On Abrasive Disc 2"

Sheet Metal Drill Bit Alloy Steel 3/16"

Aluminum Oxide Grain Locking Grinding Disc 2"

Scotch-Brite Roloc Bristle Disc 2"

Abrasive Bristle Wire Belt Steel 23mm

Scotch-Brite Roloc Bristle Disc 2"

Your Recently Viewed Items