Pilotdrive Cryotap M16 x 1.5 Starter Hand Tap
(Pack of 1)

SKU:DY80636025 Item#: DY80636025

CryoTool®

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Check Availability

Quantity

Frequently Bought Together

Reciprocating Saw Blade 9" 14TPI

M2 Sheet Metal Hole Cutter 5/16"

Air Saw Blade 4" 32TPI

9178NFO Cut Resistant Gloves

9178NFO Cut Resistant Gloves

Adhesive-Back Shim Stock 5/32 x 3/8" x 30'

Front Bumper Push-Type Retainer Nylon 20mm

Molding Clip with Sealer Nylon White 11.5 x 21

Air Distributor Defroster Push-Type Retainer

HSS Spiral Point Hand Tap 1/4-20

HSS Spiral Point Hand Tap 6-32

Pilotdrive Cryotap 1/4"-20 Starter Hand Tap

Item#: DY80635009

4-Flute HSS Plug Hand Tap M8 x 1

Carbon Steel Replacement Hand Tap 9/16-18

HSS Combination Drill-Tap 10-24

Zirconium Grain Locking Grinding Disc 2"

Abrasive Bristle Wire Belt Steel 23mm

Polymer Wheel Rubber Eraser 30mm

Product Description

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Technical Specifications

Item#:	DY80636025
Type	Metric
Diameter	M16
Pitch	1.5 mm
Flutes	4
Overall Length	3-13/16 "
Recommended Drill Size	37/64 "
UNSPSC #:	23241615
TAA Compliant:	No
Weight:	0.185 lb

Product Restrictions

Suggested Products

Spot Weld Remover Drill Bit HSS 2-13/16(M8)

Sheet Metal Drill Bit Alloy Steel 1/8"

Spot Weld Remover Drill Bit HSS 1/4" (M6)

Spot Weld Remover Drill Bit HSS 3/8" (M10)

Abrasive Hand Pad All Purpose 6 x 9"

Sheet Metal Drill Bit Alloy Steel 1/4"

Twist-On Abrasive Disc 2"

Sheet Metal Drill Bit Alloy Steel 3/16"

Spot Weld Remover Drill Bit Cobalt 5/16" (M8)

Scotch-Brite Roloc Bristle Disc 2"

Scotch-Brite Roloc Bristle Disc 2"

Twist-On Abrasive Disc 2"

Your Recently Viewed Items