4-Flute HSS Hand Tap Kit 12-28
(Pack of
1.0)
Lawson Tap Sets include Taper, Plug and Bottoming Style Taps; replacement taps are available in each style.
Taper Style
8 to 10 threads chamfered. For easy thread starting in tough materials.
Plug Style
3 to 5 threads chamfered. For general use when tapping to bottom of hole is not critical.
Bottoming Style
1-1/2 threads chamfered. Use after threads have been started for tapping to bottom of hole.
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Gold oxide finish enhances chip flow
• Minimizes seizing and binding
• Requires less torque
• Produces a more accurate hole
• Sizes permanently marked on all taps
• Manufactured from high-speed steel
• Wear-resistant
• Used in general tapping operations of ferrous and non-ferrous materials
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Blue-Kote II Vented High Density Flap Disc 4-1/2"
Couldn't load pickup availability
Blue-Kote II Vented High Density Flap Disc 4-1/2"
Couldn't load pickup availability
HD Locking Thread Insert Kit 5/16-18 to 1/2-13
Couldn't load pickup availability
Cryotap 7/16"-20 Bottoming Hand Tap
Couldn't load pickup availability
4-Flute HSS Hand Tap Kit M18 x 2.5
Couldn't load pickup availability
4-Flute HSS Hand Tap Kit M16 x 2
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Rocker Molding Clip with Sealer Nylon Blue 17mm
Couldn't load pickup availability
Front Fender Liner Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
HSS Combination Drill-Tap M12
Couldn't load pickup availability
HSS Left Hand Plug Tap 3/8-24
Couldn't load pickup availability
HSS Combination Drill-Tap M10
Couldn't load pickup availability
CryoBit Twin Bit 1/8" dia. 135o Split Point, Stubby Length, No Flats
Couldn't load pickup availability
Cryoslash 3-5/8" x 1/2" x 0.025" Air Saw Blade 24 TPI
Couldn't load pickup availability
Razor Blade Plastic
Couldn't load pickup availability
Product Description
Lawson Tap Sets include Taper, Plug and Bottoming Style Taps; replacement taps are available in each style.Taper Style
8 to 10 threads chamfered. For easy thread starting in tough materials.
Plug Style
3 to 5 threads chamfered. For general use when tapping to bottom of hole is not critical.
Bottoming Style
1-1/2 threads chamfered. Use after threads have been started for tapping to bottom of hole.
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Gold oxide finish enhances chip flow
• Minimizes seizing and binding
• Requires less torque
• Produces a more accurate hole
• Sizes permanently marked on all taps
• Manufactured from high-speed steel
• Wear-resistant
• Used in general tapping operations of ferrous and non-ferrous materials
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 61105 |
|---|---|
| Type | Machine Screw |
| Style | Set |
| Material | High Speed Steel |
| Diameter | #12 |
| Pitch | 28 |
| Flutes | 4 |
| Thread Length | 15/16 " |
| H Limits | GH3 |
| Number of Pieces | 3 |
| Recommended Drill Size | No. 15 |
| Description | One each of Taper, Plug and Bottoming Style Taps |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.1 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
