44 Silver Bare Brazing Rod 1/16"
(Pack of
2.0)
For a variety of copper and brass applications.
Superior Advantages
• High strength
• Lower cost compared to silver alloys
• Good color match
Silver Solder Substitute
Brazing Range: 1,350°F to 1,550°F (732°C to 843°C)Recommended Flux: F40 (if needed)
Typical Applications
• Electrical contacts
• Copper wire splicing
• Brass and bronze fittings
• Copper pipes
• Copper to steel
Usage ProcedureUse a slightly carburizing flame to obtain a free-flowing bead. Cronabraze™ 44 does not require fusion of the base metal. For joining copper to copper, no flux is required, but with brass or bronze, F40 flux is needed for a strong, sure bond. It is recommended that 2" to 3" of distance be maintained between the flame cone and the base metal for best results.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
53 Pot Metal Bare Brazing Rod 1/8"
Couldn't load pickup availability
202Xl Red Flux Coated Brazing Alloy 3/16
Couldn't load pickup availability
201 The Elite Bare Brazing Alloy 1/16X18
Couldn't load pickup availability
44 Silver Bare Brazing Rod 3/32"
Couldn't load pickup availability
Radiator Grille Nut M4.2-1.41
Couldn't load pickup availability
Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 10 x 12mm
Couldn't load pickup availability
201 Rectangular Wear Disc Plate 3 x 6 x 5/32"
Couldn't load pickup availability
Heat Stick 1050F Degrees
Couldn't load pickup availability
Wear Plates Used By Maintenance Welder 1/4X4X5
Couldn't load pickup availability
Product Description
For a variety of copper and brass applications.Superior Advantages
• High strength
• Lower cost compared to silver alloys
• Good color match
Silver Solder Substitute
Brazing Range: 1,350°F to 1,550°F (732°C to 843°C)Recommended Flux: F40 (if needed)
Typical Applications
• Electrical contacts
• Copper wire splicing
• Brass and bronze fittings
• Copper pipes
• Copper to steel
Usage ProcedureUse a slightly carburizing flame to obtain a free-flowing bead. Cronabraze™ 44 does not require fusion of the base metal. For joining copper to copper, no flux is required, but with brass or bronze, F40 flux is needed for a strong, sure bond. It is recommended that 2" to 3" of distance be maintained between the flame cone and the base metal for best results.
Technical Specifications
| Item#: | CW1838 |
|---|---|
| Welding Process | Brazing |
| Type | Bare |
| Diameter | 1/16 " |
| Length | 36 " |
| Melting Temperature | 1350-1550 °F |
| Color | Copper |
| Base Metal | Silver |
| Recommended Flux | F40 |
| Description | Copper/Brass |
| UNSPSC #: | 23271804 |
| TAA Compliant: | No |
| Weight: | 2.0 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
