Drive Anchor Alloy Steel 1/4 x 3"
(Pack of
25.0)
• Made of high-strength heat-treated alloy steel with zinc plating
• Flat head style
• Works best when countersunk
• Same size hole diameter as anchor diameter
• Dead loads only
• Meets GSA Specification FF-325C, Group VI
1. Using 1/4" carbide bit, drill hole at least 1/4" deeper than anchor embedment. Clean hole of debris.
2. To set, drive anchor into hole through item to be fastened.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Drill 'N Drive Masonry Anchor Assortment 283Pcs
Couldn't load pickup availability
Standard Self-Drilling Wallboard Anchor Kit 41Pcs
Couldn't load pickup availability
Masonry Anchor Assortment 700Pcs
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 3/16"
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 30mm
Couldn't load pickup availability
Serrated Hex Flange Nut Alloy Steel M6-1
Couldn't load pickup availability
Engine Under Cover Drive Rivet Plastic 7mm Hole
Couldn't load pickup availability
Bumper Fascia General Purpose Split Rivet 3/16"
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Product Description
• Made of high-strength heat-treated alloy steel with zinc plating• Flat head style
• Works best when countersunk
• Same size hole diameter as anchor diameter
• Dead loads only
• Meets GSA Specification FF-325C, Group VI
1. Using 1/4" carbide bit, drill hole at least 1/4" deeper than anchor embedment. Clean hole of debris.
2. To set, drive anchor into hole through item to be fastened.
Technical Specifications
| Item#: | 64554 |
|---|---|
| Diameter | 1/4 " |
| Length | 3 " |
| Hole Diameter | 1/4 " |
| Type | Drive Anchors |
| Minimum Embedment | 1-1/8 " |
| Material | Steel |
| Ultimate Load In 3,000 PSI Concrerte | 2,010 lb |
| Finish | Zinc |
| UNSPSC #: | 31162101 |
| TAA Compliant: | Yes |
| Weight: | 1.1 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
