Combination Drill-Tap, M1 High Speed Steel, 118° Split Point, M5-0.8, 0.5" Tap Length, 2.98" Overall Length
(Pack of
1)
• Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole
• 118° spiral point
• Three positive driving flats on the shank
• Neck is reduced below minor diameter for added clearance
• Made of M1 high-speed steel
• Made in USA
• Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
HSS Combination Drill-Tap Kit 6Pcs
Couldn't load pickup availability
HSS Combination Drill-Tap 5/16-18
Couldn't load pickup availability
HSS Combination Drill-Tap 1/4-20
Couldn't load pickup availability
Reinforced Mini Cut-Off Wheel 3"
Couldn't load pickup availability
Abrasive Bristle Wire Belt Steel 23mm
Couldn't load pickup availability
Polymer Wheel Rubber Eraser 30mm
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Push-Type Retainer Nylon 16 x 19mm
Couldn't load pickup availability
Cryo-Drap 7/16"-14 Drill & Tap Combo, 135o Split Point, W/Flats
Couldn't load pickup availability
4-Flute HSS Bottoming Hand Tap M14 x 2
Couldn't load pickup availability
4-Flute HSS Bottoming Hand Tap M4 x 0.7
Couldn't load pickup availability
Interchangeable Hex Bit Set 24Pc SAE
Couldn't load pickup availability
Master Security Bit Set 203Pc
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 3/16"
Couldn't load pickup availability
Product Description
• Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole• 118° spiral point
• Three positive driving flats on the shank
• Neck is reduced below minor diameter for added clearance
• Made of M1 high-speed steel
• Made in USA
• Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 27380 |
|---|---|
| Type | Combination Drill Tap |
| Point | 118° Split |
| Diameter | M5 |
| Pitch | 0.8 mm |
| Tap Length | 0.5000 " |
| Material Thickness | 3/8 " |
| Material | HSS |
| Overall Length | 2.98 " |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.02 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
