Pilotdrive Cryotap 5/8"-11 Starter Hand Tap
(Pack of 1.0)

CryoTool®

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Check Availability

Quantity

California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov

Frequently Bought Together

Spot Weld Remover Drill Bit HSS 2-3/4" (M8)

Cryobit 1/8" Dia. Maintenance Drill Bit , 135o Split Point, No Flats

Item#: DY80600864

Twist-On Abrasive Disc 2"

Adhesive-Back Shim Stock 9/16 x 1" x 30'

Inner Panel Rustproofer LV 16.5oz

34 Oz Manual Sprayer

Drive Rivet Nylon M8

Nylon Cable Tie 15-1/4" Black

Bumper Radiator and Grille Drive Rivet 7mm Hole

HSS Spiral Point Hand Tap 1/4-20

HSS Spiral Point Hand Tap 5/16-18

HSS Spiral Point Hand Tap M3 x 0.5

4-Flute HSS Bottoming Hand Tap M14 x 2

4-Flute HSS Bottoming Hand Tap M4 x 0.7

Carbon Steel Replacement Hand Tap M12 x 1.75

Nutsetter & Bit Set, Magnetic, 22pc

8Pc Metric Flare Nut Wrench Set

Item#: DY89310185

Sheet Metal Drill Bit Alloy Steel 1/4"

Product Description

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Technical Specifications

Item#:	DY80635021
Type	Fractional
Diameter	5/8 "
Pitch	11
Flutes	4
Thread Length	1-3/32 "
H Limits	H3
Overall Length	3-13/16 "
Recommended Drill Size	17/32 "
UNSPSC #:	23241615
TAA Compliant:	No
Weight:	0.175 lb

Product Restrictions

California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov

Suggested Products

Spot Weld Remover Drill Bit HSS 2-13/16(M8)

Sheet Metal Drill Bit Alloy Steel 1/8"

Spot Weld Remover Drill Bit HSS 1/4" (M6)

Abrasive Hand Pad All Purpose 6 x 9"

Spot Weld Remover Drill Bit HSS 3/8" (M10)

Twist-On Abrasive Disc 2"

Sheet Metal Drill Bit Alloy Steel 1/4"

Scotch-Brite Roloc Bristle Disc 2"

Aluminum Oxide Grain Locking Grinding Disc 2"

Sheet Metal Drill Bit Alloy Steel 3/16"

Scotch-Brite Roloc Bristle Disc 2"

Zirconium Grain Locking Grinding Disc 2"

Your Recently Viewed Items