Pilotdrive Cryotap M10 x 1.5 Starter Hand Tap
(Pack of 1)

CryoTool®

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Check Availability

Quantity

California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov

Frequently Bought Together

Spot Weld Remover Drill Bit HSS 2-3/4" (M8)

Stemmed Knot-Type Wire Wheel 3"

Sheet Metal Drill Bit Alloy Steel 5/32"

High-Strength Double Side Molding Tape 1/2" x 50'

Quick Seal 2000 Sprayable Seam Sealer Gray

Ure-Foam Expandable Foam Sound Deadener 10fl.oz

Rocker Molding Clip with Sealer Nylon Blue 17mm

Shield Push-Type Retainer with Metal Insert

Front Fender Push-Type Retainer Nylon 20mm

HSS Spiral Point Hand Tap M6 x 1

HSS Spiral Point Hand Tap 5-40

Pilotdrive Cryotap M18 x 1.5 Starter Hand Tap

Item#: DY80636027

Carbon Steel Replacement Hand Tap M14 x 2

4-Flute HSS Bottoming Hand Tap M16 x 2

Carbon Steel Replacement Hand Tap M5 x 0.8

Scotch-Brite Roloc Bristle Disc 2"

Spot Weld Remover Drill Bit Cobalt 5/16" (M8)

8Pc Metric Flare Nut Wrench Set

Item#: DY89310185

Product Description

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Technical Specifications

Item#:	DY80636020
Type	Metric
Diameter	M10
Pitch	1.5 mm
Flutes	4
Overall Length	2-15/16 "
Recommended Drill Size	8.5 mm
UNSPSC #:	23241615
TAA Compliant:	No
Weight:	0.07 lb

Product Restrictions

California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov

Suggested Products

Spot Weld Remover Drill Bit HSS 2-13/16(M8)

Sheet Metal Drill Bit Alloy Steel 1/8"

Spot Weld Remover Drill Bit HSS 1/4" (M6)

Spot Weld Remover Drill Bit HSS 3/8" (M10)

Abrasive Hand Pad All Purpose 6 x 9"

Twist-On Abrasive Disc 2"

Sheet Metal Drill Bit Alloy Steel 1/4"

Sheet Metal Drill Bit Alloy Steel 3/16"

Scotch-Brite Roloc Bristle Disc 2"

Spot Weld Remover Drill Bit Cobalt 5/16" (M8)

Scotch-Brite Roloc Bristle Disc 2"

Aluminum Oxide Grain Locking Grinding Disc 2"

Your Recently Viewed Items