Home Cutting Tools Smooth Cut Mill Machinist File 6 x 19/32"
Cutting Tools
DV_ZoomOriginal_I_97146.jpg
DV_ZoomOriginal_I_97146.jpg

Smooth Cut Mill Machinist File 6 x 19/32"
(Pack of 1.0)

Regency®

• Specially-treated black oxide coating reduces loading of soft materials, prolongs tooth sharpness and tool life, and resists rusting
• Precision cut for uniform tooth height and sharpness
• Scientifically heat-treated for maximum hardness and edge-holding ability
• Unique cleaning process to eliminate grit and grime normally found in the bottom (gullets) of file teeth – eliminates excess clogging for faster filing
• American pattern
• Graduated coarse, fine and extra fine teeth (wavy teeth) are standard on files with a double cut (except round shapes); reduces chattering and lasts longer
• Wavy teeth work equally well on steel, iron, aluminum, brass, bronze, copper, slate and wood
• Tool sharpening files
• Sharpens mill saws, shears, lawn mowers, axes, farm tools and circular saws
• Can be used for lathe work and general filing
• Single cut on body and edges
• Width tapers slightly toward point
File Handles are for Regency® files only.
For safety reasons and to prevent possible OSHA violations, a tanged file should never be used without a tight-fitting handle. A handle will not only help prevent accidents, it helps make the job easier and more enjoyable.
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.

Read More
Check Availability

California Proposition 65: Not Applicable
www.P65Warnings.ca.gov

Frequently Bought Together

DV_ZoomOriginal_I_P68272_WB.jpg

Twist-On Abrasive Disc 2"

Item#: P68272
DV_ZoomOriginal_I_91975.jpg

Stemmed Knot-Type Wire Wheel 3"

Item#: 91975
DV_ZoomOriginal_I_KT15080.jpg

Spot Weld Remover Drill Bit 5/16" (M8)

Item#: KT15080
DV_ZoomOriginal_I_DY89312607.jpg

Iron Claw Ergo Grip Mini Files - Crossing

Item#: DY89312607
DV_ZoomOriginal_P_3667.jpg

File Handle for 8 to 10" Files

Item#: 92055
DV_ZoomOriginal_P_3667.jpg

File Handle for 6" Files

Item#: 92053
DV_ZoomOriginal_I_DY87036100.jpg

6" American Pattern Mill Half-Round Bastard File

Item#: DY87036100
DV_ZoomOriginal_I_DY87257100.jpg

8" Second Cut American Pattern Square File

Item#: DY87257100
DV_ZoomOriginal_P_CTPMP3102.jpg

12" Second Cut Flat File

Item#: DY87218000
DV_ZoomOriginal_I_P85262.jpg

Bumper Radiator and Grille Drive Rivet 7mm Hole

Item#: P85262
DV_ZoomOriginal_I_P24082.jpg

Front Fender Push-Type Retainer Nylon 20mm

Item#: P24082
DV_ZoomOriginal_I_P15600.jpg

Bumper Push-Type Retainer Nylon 18mm

Item#: P15600
DV_ZoomOriginal_I_P67476.jpg

Sheet Metal Drill Bit Alloy Steel 1/4"

Item#: P67476
DV_ZoomOriginal_I_DY89310354.jpg

9" Hi-Level Heavy-Duty Power Jaw Plier-Cutter

Item#: DY89310354
DV_ZoomOriginal_I_56537.jpg

Scotch-Brite Roloc Bristle Disc 2"

Item#: 56537

Product Description

• Specially-treated black oxide coating reduces loading of soft materials, prolongs tooth sharpness and tool life, and resists rusting
• Precision cut for uniform tooth height and sharpness
• Scientifically heat-treated for maximum hardness and edge-holding ability
• Unique cleaning process to eliminate grit and grime normally found in the bottom (gullets) of file teeth – eliminates excess clogging for faster filing
• American pattern
• Graduated coarse, fine and extra fine teeth (wavy teeth) are standard on files with a double cut (except round shapes); reduces chattering and lasts longer
• Wavy teeth work equally well on steel, iron, aluminum, brass, bronze, copper, slate and wood
• Tool sharpening files
• Sharpens mill saws, shears, lawn mowers, axes, farm tools and circular saws
• Can be used for lathe work and general filing
• Single cut on body and edges
• Width tapers slightly toward point
File Handles are for Regency® files only.
For safety reasons and to prevent possible OSHA violations, a tanged file should never be used without a tight-fitting handle. A handle will not only help prevent accidents, it helps make the job easier and more enjoyable.
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.

Technical Specifications

Item#: 97146
Type Mill, Smooth Cut
Length 6 "
Width 19/32 "
Thickness 7/64 "
UNSPSC #: 27111900
TAA Compliant: Yes
Weight: 0.11 lb

Product Restrictions

California Proposition 65: Not Applicable
www.P65Warnings.ca.gov

Suggested Products

DV_ZoomOriginal_I_P43782.jpg

Spot Weld Remover Drill Bit HSS 2-13/16(M8)

Item#: P43782
DV_ZoomOriginal_I_P67286.jpg

Sheet Metal Drill Bit Alloy Steel 1/8"

Item#: P67286
DV_ZoomOriginal_I_P48733.jpg

Spot Weld Remover Drill Bit HSS 1/4" (M6)

Item#: P48733
DV_ZoomOriginal_I_93228.jpg

Abrasive Hand Pad All Purpose 6 x 9"

Item#: 93228
DV_ZoomOriginal_I_P48732.jpg

Spot Weld Remover Drill Bit HSS 3/8" (M10)

Item#: P48732
DV_ZoomOriginal_I_P68267.jpg

Twist-On Abrasive Disc 2"

Item#: P68267
DV_ZoomOriginal_I_P67476.jpg

Sheet Metal Drill Bit Alloy Steel 1/4"

Item#: P67476
DV_ZoomOriginal_I_56537.jpg

Scotch-Brite Roloc Bristle Disc 2"

Item#: 56537
DV_ZoomOriginal_I_P35374.jpg

Aluminum Oxide Grain Locking Grinding Disc 2"

Item#: P35374
DV_ZoomOriginal_I_P67411.jpg

Sheet Metal Drill Bit Alloy Steel 3/16"

Item#: P67411
DV_ZoomOriginal_I_56539.jpg

Scotch-Brite Roloc Bristle Disc 2"

Item#: 56539
DV_ZoomOriginal_I_P36579.jpg

Zirconium Grain Locking Grinding Disc 2"

Item#: P36741

Your Recently Viewed Items