Black Gold® Oilfield Service tuyau, Nitrile - Type C Tube intérieur, Textile synthétique multi-PLY Double fil Hélice, noir, 400 psi, 2 "ID, 200 '
(Paquet de
400)
SKU:1646911 Article#: 1646911
Transfer of water, petroleum–based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Ideal for offshore/onshore dock hose transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required. For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses.
• CAUTION: Do not convey fuels over +120°F (+49°C)
• Service life of transfer hoses can be extended by draining hoses after use
• ARPM (Class A) High oil–resistant tube
Impossible de charger la disponibilité du service de retrait
Fréquemment achetés ensemble
Fuel Master® 150d Tyr 2 "x 100 'noir
Impossible de charger la disponibilité du service de retrait
Fuel Master® 150SD LT MEGAFLEX TUYAUX 2-1 / 2 "x 100 'noir
Impossible de charger la disponibilité du service de retrait
Fuel Master® Xtreme ™ 150SD tuyau ondulé 2 "x 200 'noir
Impossible de charger la disponibilité du service de retrait
Clamp de tuyau 301 SS 9/16 à 1-1 / 16 "
Impossible de charger la disponibilité du service de retrait
Flexair 3/8 "i.d. x 25 'tuyau d'air
Impossible de charger la disponibilité du service de retrait
Acier de coupleur à air à bouton-poussoir 1/4 "x 1 / 4-18
Impossible de charger la disponibilité du service de retrait
Nylon de retenue de type push 16 x 19 mm
Impossible de charger la disponibilité du service de retrait
Panneau de garniture du pare-chocs avant / Rivet divisé en bosquet
Impossible de charger la disponibilité du service de retrait
Nylon de retenue de type poussant Push-Type 18 mm
Impossible de charger la disponibilité du service de retrait
Food Master® Dry Goods tuyau 5 "x 100 'gris
Impossible de charger la disponibilité du service de retrait
Black Gold® Oilfield Service MEGATUFF HOSE 4 "x 200 'noir
Impossible de charger la disponibilité du service de retrait
Barricade ™ en carburateur de carburant du moteur 5/16 "x 550 'noir
Impossible de charger la disponibilité du service de retrait
Plant Master™ Vapeur Plus 250 45FT
Impossible de charger la disponibilité du service de retrait
Plant Master™ Vapeur Plus 250 40FT
Impossible de charger la disponibilité du service de retrait
Clean Master® Washdown 3/4 Rouge
Impossible de charger la disponibilité du service de retrait
Description du produit
Transfer of water, petroleum–based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Ideal for offshore/onshore dock hose transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required. For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses.• CAUTION: Do not convey fuels over +120°F (+49°C)
• Service life of transfer hoses can be extended by draining hoses after use
• ARPM (Class A) High oil–resistant tube
Spécifications techniques
| Article#: | 1646911 |
|---|---|
| Taper | Pétrole - tuyau de distribution standard |
| Nom de la série du fabricant | Service de champ pétrolier Black Gold® |
| IDENTIFIANT. | 2" |
| Pression de travail | 400 psi |
| Matériau de tube intérieur | Nitrile - Type C |
| Renforcement du tuyau | Multi-pli, textile synthétique, hélice double fil |
| Matériau de couverture de tuyau | Chloroprène - Type A |
| Température | -40 à +180 ° F |
| Couleur | Noir |
| Longueur | 200 pieds |
| UNSPSC #: | 40142014 |
| Conforme à la TAA : | Oui |
