Black Gold® Oilfield Service MEGATUFF MEGATUFF, Nitrile - Type C Tube intérieur, Filament statique textile synthétique multi-plis, noir, 400 psi, 3 "ID, 100 '
(Paquet de
100)
Transfer of water, petroleum–based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Ideal for offshore/onshore dock hose transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required. For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses.
• CAUTION: Do not convey fuels over +120°F (+49°C)
• UltraBrasion™ designed with Yellow Carboxylated Nitrile (Type C4) Wear Indicator Layer
• ARPM (Class A) High oil–resistant tube
Impossible de charger la disponibilité du service de retrait
Fréquemment achetés ensemble
Fuel Master® Xtreme ™ 150SD tuyau ondulé 2 "x 200 'noir
Impossible de charger la disponibilité du service de retrait
Fuel Master® 150d tuyau 3 "x 200 'noir
Impossible de charger la disponibilité du service de retrait
Black Gold® ABS MUD et tuyau d'huile 6 "x 200 'noir
Impossible de charger la disponibilité du service de retrait
Flexair 3/8 "i.d. x 25 'tuyau d'air
Impossible de charger la disponibilité du service de retrait
Flexair 3/8 "I.D. x 50 'Assemblage d'air avec coupleur de sécurité industrielle
Impossible de charger la disponibilité du service de retrait
Flexair 3/8 "I.D. x 50 'tuyau d'air
Impossible de charger la disponibilité du service de retrait
Fender Fender Push-Type Nylon 20 mm
Impossible de charger la disponibilité du service de retrait
Reposeur de bouclier pour pare-chocs Fender 11/16 "
Impossible de charger la disponibilité du service de retrait
Conduite en nylon rivet m8
Impossible de charger la disponibilité du service de retrait
Food Master® Dry Goods tuyau 6 "x 100 'gris
Impossible de charger la disponibilité du service de retrait
Tuyau de remplissage de carburant 2-1 / 2 "x 10 'noir
Impossible de charger la disponibilité du service de retrait
Food Master® PVC Tube transparent 1 "x 100 'clair
Impossible de charger la disponibilité du service de retrait
Clean Master® Washdown 1/2 Bleu
Impossible de charger la disponibilité du service de retrait
Plant Master™ Vapeur Plus 250 30FT
Impossible de charger la disponibilité du service de retrait
Plant Master™ Vapeur Plus 250 25FT
Impossible de charger la disponibilité du service de retrait
Description du produit
Transfer of water, petroleum–based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Ideal for offshore/onshore dock hose transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required. For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses.• CAUTION: Do not convey fuels over +120°F (+49°C)
• UltraBrasion™ designed with Yellow Carboxylated Nitrile (Type C4) Wear Indicator Layer
• ARPM (Class A) High oil–resistant tube
Spécifications techniques
| Article#: | 1646920 |
|---|---|
| Taper | Pétrole - tuyau de distribution standard |
| Nom de la série du fabricant | Black Gold® Oilfield Service 400D Megateff |
| IDENTIFIANT. | 3" |
| Pression de travail | 400 psi |
| Matériau de tube intérieur | Nitrile - Type C |
| Renforcement du tuyau | Multi-pli, textile synthétique, filament statique |
| Matériau de couverture de tuyau | Polyéthylène à poids moléculaire ultra - Type L |
| Température | -40 à +180 ° F |
| Couleur | Noir |
| Longueur | 100 pieds |
| UNSPSC #: | 40142014 |
| Conforme à la TAA : | Oui |
