Black Gold® Oilfield Service MEGATUFF MEGATUFF, Nitrile - Type C Tube intérieur, Filament statique de textile synthétique multi-plis, noir, 400 psi, 4 "ID, 100 '
(Paquet de
100)
SKU:1646945 Article#: 1646945
Transfer of water, petroleum–based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Ideal for offshore/onshore dock hose transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required. For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses.
• CAUTION: Do not convey fuels over +120°F (+49°C)
• UltraBrasion™ designed with Yellow Carboxylated Nitrile (Type C4) Wear Indicator Layer
• ARPM (Class A) High oil–resistant tube
Impossible de charger la disponibilité du service de retrait
Fréquemment achetés ensemble
Tuyau de remplissage de carburant 2 "x 10 'noir
Impossible de charger la disponibilité du service de retrait
Fuel Master ™ livraison 200 tuyaux 1 "x 175 'rouge
Impossible de charger la disponibilité du service de retrait
Fuel Master® Curb Pompe Tym 3/4 "x 500 'noir
Impossible de charger la disponibilité du service de retrait
Connecteur de tuyau à vide droit 3/16 x 3/16 "
Impossible de charger la disponibilité du service de retrait
Dot pivotant mâle 360 ° en laiton 3/8 x 1 / 4-18
Impossible de charger la disponibilité du service de retrait
Flexair 3/8 "i.d. x 35 'tuyau d'air
Impossible de charger la disponibilité du service de retrait
Tie à câble en nylon 15-1 / 4 "noir
Impossible de charger la disponibilité du service de retrait
Clip de moulage à bascule avec scellant en nylon bleu 17 mm
Impossible de charger la disponibilité du service de retrait
Bouton isolant enveloppe nylon 11/16 "
Impossible de charger la disponibilité du service de retrait
Cleariat à basse pression et tuyau d'huile 1-1 / 2 "x 10 'noir
Impossible de charger la disponibilité du service de retrait
Food Master® Beverage tuyau 4 "x 100 'blanc
Impossible de charger la disponibilité du service de retrait
Black Gold® Oilfield Frac tuyau 4 "x 100 'noir
Impossible de charger la disponibilité du service de retrait
Blasse de tuyau d'air en caoutchouc OilShield 1/2 "x 300 '
Impossible de charger la disponibilité du service de retrait
Ensemble de tuyaux d'air en caoutchouc 3/8 "x 25 'et kit d'accessoires
Impossible de charger la disponibilité du service de retrait
Boulasse du tuyau d'air en caoutchouc 3/4 "x 300 '
Impossible de charger la disponibilité du service de retrait
Description du produit
Transfer of water, petroleum–based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Ideal for offshore/onshore dock hose transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required. For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses.• CAUTION: Do not convey fuels over +120°F (+49°C)
• UltraBrasion™ designed with Yellow Carboxylated Nitrile (Type C4) Wear Indicator Layer
• ARPM (Class A) High oil–resistant tube
Spécifications techniques
| Article#: | 1646945 |
|---|---|
| Taper | Pétrole - tuyau de distribution standard |
| Nom de la série du fabricant | Black Gold® Oilfield Service 400D Megateff |
| IDENTIFIANT. | 4" |
| Pression de travail | 400 psi |
| Matériau de tube intérieur | Nitrile - Type C |
| Renforcement du tuyau | Multi-pli, textile synthétique, filament statique |
| Matériau de couverture de tuyau | Polyéthylène à poids moléculaire ultra - Type L |
| Température | -40 à +180 ° F |
| Couleur | Noir |
| Longueur | 100 pieds |
| UNSPSC #: | 40142014 |
| Conforme à la TAA : | Oui |
