Black Gold® Fuel Tleyle, Nitrile - Type C Tube intérieur, Textile synthétique multi-plis Double câble Hélice, noir, 300 psi, 2 "ID, 200 '
(Paquet de
400)
SKU:1646907 Article#: 1646907
Transfer of refined fuels (commercial gasoline and diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving suction and discharge service for diesel oils and other similar petroleum products where an extremely lightweight, hardwall, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum–based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking.
• CAUTION: For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C)
• ARPM (Class A) High oil–resistant tube
Fréquemment achetés ensemble
Tuyau de lavage sous pression en caoutchouc Tough-Tek 3/8" X 100', bleu
$0.00
Impossible de charger la disponibilité du service de retrait
Support pivotant pour enrouleur de tuyau à 180°
$0.00
Impossible de charger la disponibilité du service de retrait
Tuyau de lavage sous pression en caoutchouc Tough-Tek 1/4" X 50' avec raccords M22
$0.00
Impossible de charger la disponibilité du service de retrait
Push-Button Air Coupler Plug Arear 1/4 "x 1 / 4-18
$0.00
Impossible de charger la disponibilité du service de retrait
Acier de coupleur à air à bouton-poussoir 1/4 "x 1 / 4-18
$0.00
Impossible de charger la disponibilité du service de retrait
Bragas de tuyau à tête hexagonale à fentes 301 SS 9/16 à 1-1 / 4 "
$0.00
Impossible de charger la disponibilité du service de retrait
Cowl Bumper Fender liner / moteur sous couverture Rivet
$0.00
Impossible de charger la disponibilité du service de retrait
Fender Fender Push-Type Nylon 20 mm
$0.00
Impossible de charger la disponibilité du service de retrait
Conduite en nylon rivet m8
$0.00
Impossible de charger la disponibilité du service de retrait
Tuyau d'injection de carburant diesel 1/2 "x 550 'noir
$0.00
Impossible de charger la disponibilité du service de retrait
Barricade® Greenshield® Fuel Tycle 1/4 "x 550 'noir
$0.00
Impossible de charger la disponibilité du service de retrait
Food Master® PVC Clear Tubing 2 "x 50 'Clear
$0.00
Impossible de charger la disponibilité du service de retrait
Ensemble de tuyaux d'air en caoutchouc 3/8 "x 25 '
$0.00
Impossible de charger la disponibilité du service de retrait
Assemblage du tuyau d'air / eau 1/4 "x 50 'rouge
$0.00
Impossible de charger la disponibilité du service de retrait
Assemblage du tuyau d'eau de l'entrepreneur 3/4 "x 50 'noir
$0.00
Impossible de charger la disponibilité du service de retrait
Description du produit
Transfer of refined fuels (commercial gasoline and diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving suction and discharge service for diesel oils and other similar petroleum products where an extremely lightweight, hardwall, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum–based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking.• CAUTION: For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C)
• ARPM (Class A) High oil–resistant tube
Spécifications techniques
| Article#: | 1646907 |
|---|---|
| Taper | Pétrole - tuyau de distribution standard |
| Nom de la série du fabricant | Black Gold® Fuel 300SD |
| IDENTIFIANT. | 2" |
| Pression de travail | 300 psi |
| Rayon de courbure minimum | 10.0 " |
| Matériau de tube intérieur | Nitrile - Type C |
| Renforcement du tuyau | Multi-pli, textile synthétique, hélice double fil |
| Matériau de couverture de tuyau | Chloroprène - Type A |
| Température | -40 à +180 ° F |
| Couleur | Noir |
| Longueur | 200 pieds |
| UNSPSC #: | 40142014 |
| Conforme à la TAA : | Oui |
