Tuyau hydraulique multi-fluide C5D, CPE, 2 fils tressé, 5/16 "ID, 0,67" OD, 385 ', 1500PSI
(Paquet de
385)
SKU:1644717 Article#: 1644717
C5D high-temp hose is recommended for use with petroleum-based or phosphate ester fluids; diesel fuels and filtration lines, transmission coolant lines, hot lube oil lines, power steering (CAUTION: Intended for heavy-duty commercial vehicle use only), gasoline, turbocharger oil supplies, tilt cab cylinder and air brakes. Not approved for biodiesel above B5.
• For use with C5 and C5X Field Attachable Couplings [G34 Series]
• Black, oil and heat-resistant, synthetic rubber (CPE) tube
• Green cover for easy identification, oil and mildew resistant, polyester braid impregnated with synthetic rubber
• Meets or exceeds DOTFMVSS 106-74 Type All, SAE J1402 Type All and SAE J1405 and fuel resistance of SAE J30R2 (-4 to -12)
• Tube: Black, oil and heat-resistant, synthetic rubber (CPE)
• Reinforcement: One braid of high-tensile steel wire over one braid of polyester
• Cover: Green for easy identification, oil and mildew resistant, polyester braid impregnated with synthetic rubber
Fréquemment achetés ensemble
GTH TUYAU HYDRAULIQUE 1,13 "x 165 '
$0.00
Impossible de charger la disponibilité du service de retrait
Tuyau hydraulique à faible tempête EFG4K 1,53 "x 50 '
$0.00
Impossible de charger la disponibilité du service de retrait
Union hydraulique 3 / 8-18 x 3 / 8-18
$0.00
Impossible de charger la disponibilité du service de retrait
Union hydraulique 1/4-18 x 1/4-18
$0.00
Impossible de charger la disponibilité du service de retrait
Point pivotant mâle mâle 360 ° en laiton 1/4 x 1 / 8-27
$0.00
Impossible de charger la disponibilité du service de retrait
Clamp de tuyau 301 SS 3/4 à 1-3 / 4 "
$0.00
Impossible de charger la disponibilité du service de retrait
Fascia de pare-chocs Push-Type Nylon 18 mm
$0.00
Impossible de charger la disponibilité du service de retrait
Nylon de retenue de type push
$0.00
Impossible de charger la disponibilité du service de retrait
Assemblage d'eau en caoutchouc Avagard 5/8 "x 50 '
$0.00
Impossible de charger la disponibilité du service de retrait
Description du produit
C5D high-temp hose is recommended for use with petroleum-based or phosphate ester fluids; diesel fuels and filtration lines, transmission coolant lines, hot lube oil lines, power steering (CAUTION: Intended for heavy-duty commercial vehicle use only), gasoline, turbocharger oil supplies, tilt cab cylinder and air brakes. Not approved for biodiesel above B5.• For use with C5 and C5X Field Attachable Couplings [G34 Series]
• Black, oil and heat-resistant, synthetic rubber (CPE) tube
• Green cover for easy identification, oil and mildew resistant, polyester braid impregnated with synthetic rubber
• Meets or exceeds DOTFMVSS 106-74 Type All, SAE J1402 Type All and SAE J1405 and fuel resistance of SAE J30R2 (-4 to -12)
• Tube: Black, oil and heat-resistant, synthetic rubber (CPE)
• Reinforcement: One braid of high-tensile steel wire over one braid of polyester
• Cover: Green for easy identification, oil and mildew resistant, polyester braid impregnated with synthetic rubber
Spécifications techniques
| Article#: | 1644717 |
|---|---|
| No de modèle du fabricant : | 6C5D XREEL |
| Industriel / hydraulique | Hydraulique |
| Taper | Caoutchouc - tresse en tissu |
| Catégorie / performance | Pression moyenne |
| Note de l'industrie 1 | Type J1402 AII |
| Numéro de série du fabricant | 6c5d |
| Nom de la série du fabricant | MegaTech® |
| IDENTIFIANT. | 3/8 (-6) " |
| Tuyau O.D. | 0.66 " |
| Pression de travail | 1 000 psi |
| Pression d'éclatement | 6000 psi |
| Rayon de pliage | 1.8 " |
| Matériau de tube intérieur | CPE |
| Renforcement du tuyau | 1 BRUINDE, FIL |
| Matériau de couverture de tuyau | Tresse en polyester imprégné avec caoutchouc synthétique |
| Température minimale | -40 ° F |
| Température maximale | 300 ° F |
| Couleur | Noir |
| Longueur | 350 pieds |
| Taille du tableau de bord | 6 |
| UNSPSC #: | 40142020 |
| Conforme à la TAA : | Non |
