CR2 Pro Series Hose, nitrile, 2 fils tressé, 5/8 "ID, 0,98" OD, 1800 ', 3625Psi
(Paquet de
1800)
SKU:1645113 Article#: 1645113
Gates® PRO™ Series CR2 variable pressure hydraulic hoses deliver performance and reliability in a two-wire construction. Engineered for less demanding hydraulic applications, our line of professional-grade hoses is designed to balance product performance and investment for everyday uses. All sizes deliver consistent performance to SAE and EN industry specifications. Qualified with Gates® PRO™ Series and MegaCrimp™ Couplings. Recommended for medium pressure hydraulic with low flexure/non-flexure applications.
• Recommended For: High-pressure hydraulics with low flexure/non-severe applications requiring the SAE 100R2 or EN853 2SN specification for dimensions and performance
• Recommended Couplings: PCK Couplings (-4 to -16), MegaCrimp™ Couplings (-4 to -16), GB Couplings (-6 and -8)
• Tested to minimum SAE 100R2 200,000 impulse cycles
• Cover: MSHA approved
• Standards: Meets or exceeds requirements of EN 853 2SN
• Size: 1/4" to 1"
Impossible de charger la disponibilité du service de retrait
Fréquemment achetés ensemble
Tuyau hydraulique G3H 1,5 "x 120 '
Impossible de charger la disponibilité du service de retrait
Adaptateurs 8MP-8FPX45
Impossible de charger la disponibilité du service de retrait
Pipe Elbow Brass 90 ° 1 / 8-27 x 1 / 8-27
Impossible de charger la disponibilité du service de retrait
Plastique à pare-chocs avant Rivet Plastique 7 mm
Impossible de charger la disponibilité du service de retrait
AG-Lite Rubber Water Tyal Lead dans 1 "x 6 '
Impossible de charger la disponibilité du service de retrait
Description du produit
Gates® PRO™ Series CR2 variable pressure hydraulic hoses deliver performance and reliability in a two-wire construction. Engineered for less demanding hydraulic applications, our line of professional-grade hoses is designed to balance product performance and investment for everyday uses. All sizes deliver consistent performance to SAE and EN industry specifications. Qualified with Gates® PRO™ Series and MegaCrimp™ Couplings. Recommended for medium pressure hydraulic with low flexure/non-flexure applications.• Recommended For: High-pressure hydraulics with low flexure/non-severe applications requiring the SAE 100R2 or EN853 2SN specification for dimensions and performance
• Recommended Couplings: PCK Couplings (-4 to -16), MegaCrimp™ Couplings (-4 to -16), GB Couplings (-6 and -8)
• Tested to minimum SAE 100R2 200,000 impulse cycles
• Cover: MSHA approved
• Standards: Meets or exceeds requirements of EN 853 2SN
• Size: 1/4" to 1"
Spécifications techniques
| Article#: | 1645113 |
|---|---|
| Industriel / hydraulique | Hydraulique |
| Taper | Caoutchouc - tresse en tissu |
| Catégorie / performance | Haute pression |
| Note de l'industrie 1 | 100r2 |
| Numéro de série du fabricant | 10cr2 |
| Nom de la série du fabricant | M3K |
| IDENTIFIANT. | 5/8 (-10) " |
| Tuyau O.D. | 0.99 " |
| Pression de travail | 3 250 psi |
| Pression d'éclatement | 14500 psi |
| Rayon de pliage | 8 " |
| Matériau de tube intérieur | Nitrile |
| Renforcement du tuyau | 2 BRUINDES, FIL |
| Matériau de couverture de tuyau | SBR modifié |
| Température minimale | -40 ° F |
| Température maximale | 212 ° F |
| Couleur | Noir |
| Longueur | 2500 pieds |
| Taille du tableau de bord | 10 |
| UNSPSC #: | 40142020 |
| Conforme à la TAA : | Non |
