Tuyau hydraulique loc, nitrile, 1-textile tressé, 3/4 "ID, tuyau 1" OD, 225 ', 300psi
(Paquet de
225)
SKU:1644758 Article#: 1644758
Gates LOC Lock-On Hose is ideal for petroleum-based hydraulic oils, glycol anti–freeze compounds, water, engine lubricating oils and air. Lock–On hose and couplings are NOT recommended for vibration or pressure surge applications, such as permanent piping in residential or commercial buildings.
• Recommended For: Petroleum-based hydraulic oils, glycol anti-freeze compounds, water, engine lubricating oils and air. Lock-On hose and couplings are NOT recommended for vibration or pressure surge applications, such as permanent piping in residential or commercial buildings
• For use with Field Attachable LOC Couplings [G36 Series], use clamp over G37 single bead and G38 barbed fittings with clamp
• Oil and mildew resistant textile braided cover impregnated with synthetic rubber
• Meets SAE 30R2, SAE 30R6 and SAE 30R7 performance requirements for fuel and B20 biodiesel fuel transfer applications up to +125°F (+52°C)
Fréquemment achetés ensemble
Tuyau hydraulique à faible tempête EFG4K 1,53 "x 50 '
$0.00
Impossible de charger la disponibilité du service de retrait
Tuyau hydraulique SAE R16S en caoutchouc 1,39" x 200'
$0.00
Impossible de charger la disponibilité du service de retrait
ACTEUR DE PLIGNE DU CONCRIPTION RAPIDE 1/4 "x 1 / 4-18
$0.00
Impossible de charger la disponibilité du service de retrait
Nylon de retenue de type push
$0.00
Impossible de charger la disponibilité du service de retrait
Blushield Rubber Pressure Washer Tymage 1/4 "x 25 '
$0.00
Impossible de charger la disponibilité du service de retrait
Description du produit
Gates LOC Lock-On Hose is ideal for petroleum-based hydraulic oils, glycol anti–freeze compounds, water, engine lubricating oils and air. Lock–On hose and couplings are NOT recommended for vibration or pressure surge applications, such as permanent piping in residential or commercial buildings.• Recommended For: Petroleum-based hydraulic oils, glycol anti-freeze compounds, water, engine lubricating oils and air. Lock-On hose and couplings are NOT recommended for vibration or pressure surge applications, such as permanent piping in residential or commercial buildings
• For use with Field Attachable LOC Couplings [G36 Series], use clamp over G37 single bead and G38 barbed fittings with clamp
• Oil and mildew resistant textile braided cover impregnated with synthetic rubber
• Meets SAE 30R2, SAE 30R6 and SAE 30R7 performance requirements for fuel and B20 biodiesel fuel transfer applications up to +125°F (+52°C)
Spécifications techniques
| Article#: | 1644758 |
|---|---|
| No de modèle du fabricant : | 12LOC XREEL |
| Industriel / hydraulique | Hydraulique |
| Taper | Caoutchouc - tresse en tissu |
| Catégorie / performance | Basse pression |
| Note de l'industrie 1 | 30r2 |
| Numéro de série du fabricant | 12loc |
| Nom de la série du fabricant | LOL PLUS |
| IDENTIFIANT. | 3/4 (-12) " |
| Tuyau O.D. | 1.06 " |
| Pression de travail | 300 psi |
| Pression d'éclatement | 1200 psi |
| Rayon de pliage | 7 " |
| Matériau de tube intérieur | Nitrile |
| Renforcement du tuyau | 1 Braitte, textile |
| Matériau de couverture de tuyau | Tresse textile imprégnée de caoutchouc synthétique |
| Température minimale | -40 ° F |
| Température maximale | 250 ° F |
| Couleur | Noir |
| Longueur | 225 pieds |
| Taille du tableau de bord | 12 |
| UNSPSC #: | 40142020 |
| Conforme à la TAA : | Non |
