Tuyau hydraulique loc, nitrile, 1-textile tressé, 5/16 "ID, 0,55" OD, 50 ', 300psi
(Paquet de
1)
SKU:1644783 Article#: 1644783
Gates LOC Lock-On Hose is ideal for petroleum-based hydraulic oils, glycol anti–freeze compounds, water, engine lubricating oils and air. Lock–On hose and couplings are NOT recommended for vibration or pressure surge applications, such as permanent piping in residential or commercial buildings.
• Recommended For: Petroleum-based hydraulic oils, glycol anti-freeze compounds, water, engine lubricating oils and air. Lock-On hose and couplings are NOT recommended for vibration or pressure surge applications, such as permanent piping in residential or commercial buildings
• For use with Field Attachable LOC Couplings [G36 Series], use clamp over G37 single bead and G38 barbed fittings with clamp
• Oil and mildew resistant textile braided cover impregnated with synthetic rubber
• Meets SAE 30R2, SAE 30R6 and SAE 30R7 performance requirements for fuel and B20 biodiesel fuel transfer applications up to +125°F (+52°C)
Fréquemment achetés ensemble
Caoutchouc de tuyau hydraulique M2T 0,82 "x 50 '
$0.00
Impossible de charger la disponibilité du service de retrait
SAE R16S Caoutchouc de tuyau hydraulique 0,81 "x 50 '
$0.00
Impossible de charger la disponibilité du service de retrait
Tuyau hydraulique SAE R16S en caoutchouc 0,81" x 300'
$0.00
Impossible de charger la disponibilité du service de retrait
GM005 PCTS Swager Poussoir
$0.00
Impossible de charger la disponibilité du service de retrait
Ag-Lite Rubber Water Water Lead in 3/4 "x 6 '
$0.00
Impossible de charger la disponibilité du service de retrait
Coupleur AC polaireal, tube sans flor
$0.00
Impossible de charger la disponibilité du service de retrait
Cramp miniature SS 1/8 à 7/16 "
$0.00
Impossible de charger la disponibilité du service de retrait
Acier de coupleur de déconnexion rapide 1/4 "x 1 / 4-18
$0.00
Impossible de charger la disponibilité du service de retrait
Push-Button Air Coupler Plug Arear 1/4 "x 1 / 4-18
$0.00
Impossible de charger la disponibilité du service de retrait
Fender tablier Rivet Rivet 8 mm
$0.00
Impossible de charger la disponibilité du service de retrait
Moteur sous couvercle couvercle rivet plastique de 7 mm
$0.00
Impossible de charger la disponibilité du service de retrait
Cowl Bumper Fender liner / moteur sous couverture Rivet
$0.00
Impossible de charger la disponibilité du service de retrait
Caoutchouc de tuyau hydraulique M2T 0,82 "x 50 '
$0.00
Impossible de charger la disponibilité du service de retrait
SAE R16S Caoutchouc de tuyau hydraulique 0,81 "x 50 '
$0.00
Impossible de charger la disponibilité du service de retrait
Tuyau hydraulique SAE R16S en caoutchouc 0,81" x 300'
$0.00
Impossible de charger la disponibilité du service de retrait
Description du produit
Gates LOC Lock-On Hose is ideal for petroleum-based hydraulic oils, glycol anti–freeze compounds, water, engine lubricating oils and air. Lock–On hose and couplings are NOT recommended for vibration or pressure surge applications, such as permanent piping in residential or commercial buildings.• Recommended For: Petroleum-based hydraulic oils, glycol anti-freeze compounds, water, engine lubricating oils and air. Lock-On hose and couplings are NOT recommended for vibration or pressure surge applications, such as permanent piping in residential or commercial buildings
• For use with Field Attachable LOC Couplings [G36 Series], use clamp over G37 single bead and G38 barbed fittings with clamp
• Oil and mildew resistant textile braided cover impregnated with synthetic rubber
• Meets SAE 30R2, SAE 30R6 and SAE 30R7 performance requirements for fuel and B20 biodiesel fuel transfer applications up to +125°F (+52°C)
Spécifications techniques
| Article#: | 1644783 |
|---|---|
| No de modèle du fabricant : | 5LOC X50FT |
| Industriel / hydraulique | Hydraulique |
| Taper | Caoutchouc - tresse en tissu |
| Catégorie / performance | Basse pression |
| Note de l'industrie 1 | N / A |
| Numéro de série du fabricant | 5loc |
| Nom de la série du fabricant | LOL PLUS |
| IDENTIFIANT. | 3/8 (-6) " |
| Tuyau O.D. | 0.63 " |
| Pression de travail | 300 psi |
| Pression d'éclatement | 1200 psi |
| Rayon de pliage | 3 " |
| Matériau de tube intérieur | Nitrile |
| Renforcement du tuyau | 1 Braitte, textile |
| Matériau de couverture de tuyau | Nitrile modifié - Type C2 |
| Température minimale | -40 ° F |
| Température maximale | 250 ° F |
| Couleur | Noir |
| Longueur | 25 pieds |
| Taille du tableau de bord | 5 |
| UNSPSC #: | 40142020 |
| Conforme à la TAA : | Non |
