Tuyau hydraulique loc, nitrile, 1-textile tressé, 5/8 "ID, 0,9" OD, 250 ', 300psi
(Paquet de
250)
SKU:1644752 Article#: 1644752
Gates LOC Lock-On Hose is ideal for petroleum-based hydraulic oils, glycol anti–freeze compounds, water, engine lubricating oils and air. Lock–On hose and couplings are NOT recommended for vibration or pressure surge applications, such as permanent piping in residential or commercial buildings.
• Recommended For: Petroleum-based hydraulic oils, glycol anti-freeze compounds, water, engine lubricating oils and air. Lock-On hose and couplings are NOT recommended for vibration or pressure surge applications, such as permanent piping in residential or commercial buildings
• For use with Field Attachable LOC Couplings [G36 Series], use clamp over G37 single bead and G38 barbed fittings with clamp
• Oil and mildew resistant textile braided cover impregnated with synthetic rubber
• Meets SAE 30R2, SAE 30R6 and SAE 30R7 performance requirements for fuel and B20 biodiesel fuel transfer applications up to +125°F (+52°C)
Fréquemment achetés ensemble
Tuyau hydraulique G2L 1,15 "x 220 '
$0.00
Impossible de charger la disponibilité du service de retrait
GTH TUYAU HYDRAULIQUE 1,13 "x 165 '
$0.00
Impossible de charger la disponibilité du service de retrait
Tuyau hydraulique à faible tempête EFG4K 1,53 "x 50 '
$0.00
Impossible de charger la disponibilité du service de retrait
Tuyau hydraulique SAE R16S en caoutchouc 0,81" x 300'
$0.00
Impossible de charger la disponibilité du service de retrait
Tuyau hydraulique en caoutchouc SAE R16S 0,94" x 200'
$0.00
Impossible de charger la disponibilité du service de retrait
Tuyau hydraulique SAE R16S en caoutchouc 1,39" x 200'
$0.00
Impossible de charger la disponibilité du service de retrait
Coupleur de sécurité à bouton-poussoir de sécurité industrielle standard 1/4 "Body x 1/4" FNPT
$0.00
Impossible de charger la disponibilité du service de retrait
Buse de tuyau de mousson 3/4 "
$0.00
Impossible de charger la disponibilité du service de retrait
ACTEUR DE PLIGNE DU CONCRIPTION RAPIDE 1/4 "x 1 / 4-18
$0.00
Impossible de charger la disponibilité du service de retrait
Fender Splash Shield Retenue Nylon 20 mm
$0.00
Impossible de charger la disponibilité du service de retrait
Fascia de pare-chocs Push-Type Nylon 18 mm
$0.00
Impossible de charger la disponibilité du service de retrait
Nylon de retenue de type push
$0.00
Impossible de charger la disponibilité du service de retrait
Assemblage d'eau en caoutchouc Avagard 5/8 "x 50 '
$0.00
Impossible de charger la disponibilité du service de retrait
Assemblage de gaspillement à pression en caoutchouc blushield 1/4 "x 100 '
$0.00
Impossible de charger la disponibilité du service de retrait
Blushield Rubber Pressure Washer Tymage 1/4 "x 25 '
$0.00
Impossible de charger la disponibilité du service de retrait
Description du produit
Gates LOC Lock-On Hose is ideal for petroleum-based hydraulic oils, glycol anti–freeze compounds, water, engine lubricating oils and air. Lock–On hose and couplings are NOT recommended for vibration or pressure surge applications, such as permanent piping in residential or commercial buildings.• Recommended For: Petroleum-based hydraulic oils, glycol anti-freeze compounds, water, engine lubricating oils and air. Lock-On hose and couplings are NOT recommended for vibration or pressure surge applications, such as permanent piping in residential or commercial buildings
• For use with Field Attachable LOC Couplings [G36 Series], use clamp over G37 single bead and G38 barbed fittings with clamp
• Oil and mildew resistant textile braided cover impregnated with synthetic rubber
• Meets SAE 30R2, SAE 30R6 and SAE 30R7 performance requirements for fuel and B20 biodiesel fuel transfer applications up to +125°F (+52°C)
Spécifications techniques
| Article#: | 1644752 |
|---|---|
| No de modèle du fabricant : | 10LOC XREEL |
| Industriel / hydraulique | Hydraulique |
| Taper | Caoutchouc - tresse en tissu |
| Catégorie / performance | Basse pression |
| Note de l'industrie 1 | 30r2 |
| Numéro de série du fabricant | 10loc |
| Nom de la série du fabricant | MegaTech® |
| IDENTIFIANT. | 5/8 (-10) " |
| Tuyau O.D. | 0.91 " |
| Pression de travail | 300 psi |
| Pression d'éclatement | 1200 psi |
| Rayon de pliage | 6 " |
| Matériau de tube intérieur | CPE |
| Renforcement du tuyau | 1 Braitte, textile |
| Matériau de couverture de tuyau | Tresse textile imprégnée de caoutchouc synthétique |
| Température minimale | -40 ° F |
| Température maximale | 250 ° F |
| Couleur | Noir |
| Longueur | 260 pieds |
| Taille du tableau de bord | 10 |
| UNSPSC #: | 40142020 |
| Conforme à la TAA : | Non |
