Tuyau hydraulique M4K, nitrile, 2 fils tressés, 5/8 "ID, 0,99" OD, 1750 ', 4000psi
(Paquet de 1750)

SKU:1645132 Article#: 1645132

Gates®

M4K is recommended for high-pressure hydraulic applications. Easy to route and to install in extremely tight areas. Meets or exceeds requirements of ISO 18752 Grade B, SAE 100R19, EN 857 2SC and ISO11237 R19. Recommended Couplings: GlobalSpiral™ Couplings, MegaCrimp™ Couplings (-4 to -12), Stainless Steel B Couplings (-4 through -8), Stainless Steel S Couplings (-10 to -16).
• The optional MegaTuff™ cover lasts up to 300 times longer than standard hose during hose-to-hose and hose-to-metal abrasion tests per ISO 6945 and offers superior ozone and weathering resistance
• The optional XtraTuff™ cover lasts up to 25 times longer than standard hose
• For use with GlobalSpiral™ Couplings [G20 Series], MegaCrimp™ Couplings [G25 Series], Stainless Steel Braid Couplings [G17 Series] or Stainless Steel Spiral Couplings [G18 Series]
• Tested to 600,000 impulse cycles, 3 times the industry standard
• M4K hose is compatible with biodegradable hydraulic fluids like synthetic esters, polyglycols and vegetable oils as well as petroleum-based fluids
• Provides bend radius up to 1/3 of the SAE specification and greater flexibility for easier routing
• Meets Flame Resistance Acceptance Designation MSHA 2G
• Provides greater performance, flexibility, easier routing and plumbing of mobile and stationary hydraulic platforms
• 50% of EN 857 2SC and 40% of EN 853 2SN bend radius at rated working pressure
• Alternative to spiral hoses in high pressure lines where flexibility is required
• Type approvals: DNV, GL, LR, BV and ABS
• Validated with MegaCrimp™
• Working pressure: 28 MPa
• Cover: MSHA approved
Temperature Range:
• -40°C to +100°C
• -40°F to +212°F
• Design factor: 4:1
• Size: 1/4" to 3/4"

Quantité

Fréquemment achetés ensemble

Description du produit

Spécifications techniques

Article#:	1645132
No de modèle du fabricant :	10M4K XBALE
Industriel / hydraulique	Hydraulique
Taper	Caoutchouc - tresse en tissu
Catégorie / performance	Pression moyenne
Note de l'industrie 1	100r19
Numéro de série du fabricant	10m4k
Nom de la série du fabricant	CR1 Pro
IDENTIFIANT.	3/4 (-12) "
Tuyau O.D.	1.07 "
Pression de travail	1 525 psi
Pression d'éclatement	16000 psi
Rayon de pliage	3 "
Matériau de tube intérieur	Nitrile
Renforcement du tuyau	1 BRUINDE, FIL
Matériau de couverture de tuyau	Nitrile modifié - Type C2
Température minimale	-40 ° F
Température maximale	212 ° F
Couleur	Noir
Longueur	1400 pieds
Taille du tableau de bord	10
UNSPSC #:	40142020
Conforme à la TAA :	Non