Black Gold® Fuel Tleyle, Nitrile - Type C Tube intérieur, Textile synthétique multi-plis Double câble Hélice, noir, 300 psi, 6 "ID, 100 '
(Paquet de
100)
SKU:1646988 Article#: 1646988
Transfer of refined fuels (commercial gasoline and diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving suction and discharge service for diesel oils and other similar petroleum products where an extremely lightweight, hardwall, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum–based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking.
• CAUTION: For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C)
• ARPM (Class A) High oil–resistant tube
Fréquemment achetés ensemble
Fuel Master® Curb Pompe Tym 3/4 "x 500 'noir
$0.00
Impossible de charger la disponibilité du service de retrait
Fuel Master® 150SD LT MEGAFLEX TUYAUX 2 "x 100 'bleu
$0.00
Impossible de charger la disponibilité du service de retrait
Flexible de carburant et d'huile standard 3/16 "x 550 'noir
$0.00
Impossible de charger la disponibilité du service de retrait
Push-Button Air Coupleur acier 1/4 "x 3/8-18
$0.00
Impossible de charger la disponibilité du service de retrait
ACTEUR DE PLIGNE DU CONCRIPTION RAPIDE 1/4 "x 1 / 4-18
$0.00
Impossible de charger la disponibilité du service de retrait
Buse de tuyau de mousson 3/4 "
$0.00
Impossible de charger la disponibilité du service de retrait
Clip de moulure avec scellant en nylon blanc 10 x 12 mm
$0.00
Impossible de charger la disponibilité du service de retrait
Phillips Tente de la tête de la tête de la tête en métal 15 mm
$0.00
Impossible de charger la disponibilité du service de retrait
Bumper avant spécialité noix d'acier M4.2-1.41
$0.00
Impossible de charger la disponibilité du service de retrait
Black Gold® ABS MUD et tuyau d'huile 2 "x 200 'noir
$0.00
Impossible de charger la disponibilité du service de retrait
Tuyau de remplissage de carburant 1-3 / 4 "x 10 'noir
$0.00
Impossible de charger la disponibilité du service de retrait
Huiles et tuyaux laitiers des aliments Master® 2-1 / 2 "x 100 'bleu
$0.00
Impossible de charger la disponibilité du service de retrait
Tyonnage à air en caoutchouc OilShield Ensemble de bras unique lourds 1/2 "x 50 '
$0.00
Impossible de charger la disponibilité du service de retrait
Assemblage du tuyau à air en caoutchouc OilShield Rubrique 3/8 "x 100 '
$0.00
Impossible de charger la disponibilité du service de retrait
Assemblage d'air de marteau à caoutchouc de caoutchouc pro 3/4 "x 50 '
$0.00
Impossible de charger la disponibilité du service de retrait
Description du produit
Transfer of refined fuels (commercial gasoline and diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving suction and discharge service for diesel oils and other similar petroleum products where an extremely lightweight, hardwall, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum–based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking.• CAUTION: For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C)
• ARPM (Class A) High oil–resistant tube
Spécifications techniques
| Article#: | 1646988 |
|---|---|
| Taper | Pétrole - tuyau de distribution standard |
| Nom de la série du fabricant | Black Gold® Fuel 300SD |
| IDENTIFIANT. | 6" |
| Pression de travail | 300 psi |
| Rayon de courbure minimum | 36.0 " |
| Matériau de tube intérieur | Nitrile - Type C |
| Renforcement du tuyau | Multi-pli, textile synthétique, hélice double fil |
| Matériau de couverture de tuyau | Chloroprène - Type A |
| Température | -40 à +180 ° F |
| Couleur | Noir |
| Longueur | 100 pieds |
| UNSPSC #: | 40142014 |
| Conforme à la TAA : | Oui |
