Black Gold® Fuel Tleyle, Nitrile - Type C Tube intérieur, renforcement de filament statique textile synthétique multi-plis, noir, 300 psi, 2 "ID, 100 '
(Paquet de
400)
SKU:1646898 Article#: 1646898
Transfer of refined fuels (commercial gasoline and diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving suction and discharge service for diesel oils and other similar petroleum products where an extremely lightweight, hardwall, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum–based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking.
• CAUTION: For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C)
• ARPM (Class A) High oil–resistant tube
Impossible de charger la disponibilité du service de retrait
Fréquemment achetés ensemble
Fuel Master® Curb Pompe Tym 3/4 "x 500 'noir
Impossible de charger la disponibilité du service de retrait
Fuel Master® 150SD LT MEGAFLEX TUYAUX 2 "x 100 'bleu
Impossible de charger la disponibilité du service de retrait
Flexible de carburant et d'huile standard 3/16 "x 550 'noir
Impossible de charger la disponibilité du service de retrait
Pipe Street Elbow Brass 90 ° 1 / 4-18 x 1 / 4-18
Impossible de charger la disponibilité du service de retrait
Pipe Bruisce en laiton 1 / 2-14 x 3/8-18
Impossible de charger la disponibilité du service de retrait
Connecteur de compression de points masculin 3/8 x 3/8 "
Impossible de charger la disponibilité du service de retrait
Phillips Tente de la tête de la tête de la tête en métal 15 mm
Impossible de charger la disponibilité du service de retrait
Tie à câble en nylon 15-1 / 4 "noir
Impossible de charger la disponibilité du service de retrait
Nylon de retenue de type push
Impossible de charger la disponibilité du service de retrait
Black Gold® ABS MUD et tuyau d'huile 2 "x 200 'noir
Impossible de charger la disponibilité du service de retrait
Tuyau de remplissage de carburant 1-3 / 4 "x 10 'noir
Impossible de charger la disponibilité du service de retrait
Huiles et tuyaux laitiers des aliments Master® 2-1 / 2 "x 100 'bleu
Impossible de charger la disponibilité du service de retrait
Assemblage du tuyau à air en caoutchouc OilShield Rubrique 3/8 "x 100 '
Impossible de charger la disponibilité du service de retrait
Assemblage d'air de marteau à caoutchouc de caoutchouc pro 3/4 "x 50 '
Impossible de charger la disponibilité du service de retrait
Assemblage du tuyau à air en caoutchouc OilShield Ensemble du bras double 1/2 "x 50 '
Impossible de charger la disponibilité du service de retrait
Description du produit
Transfer of refined fuels (commercial gasoline and diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving suction and discharge service for diesel oils and other similar petroleum products where an extremely lightweight, hardwall, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum–based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking.• CAUTION: For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C)
• ARPM (Class A) High oil–resistant tube
Spécifications techniques
| Article#: | 1646898 |
|---|---|
| Taper | Pétrole - tuyau de distribution standard |
| Nom de la série du fabricant | Black Gold® Fuel 300D |
| IDENTIFIANT. | 2" |
| Pression de travail | 300 psi |
| Rayon de courbure minimum | 14.0 " |
| Matériau de tube intérieur | Nitrile - Type C |
| Renforcement du tuyau | Multi-pli, textile synthétique, filament statique |
| Matériau de couverture de tuyau | Chloroprène - Type A |
| Température | -40 à +180 ° F |
| Couleur | Noir |
| Longueur | 100 pieds |
| UNSPSC #: | 40142014 |
| Conforme à la TAA : | Oui |
