3/4" Dr Retaining Ring Cush Gauge 1-5/8"
(Pack of
1)
Cracked sockets and or worn drive tools cause each other to turn excessively in relation to each other
Designed with a resin crush gauge to help identify when to replace worn sockets
Drive tool and socket should line up when in use and should not pinch the crush gauge
One piece construction, no loose parts
Pin is made of resin which allows the material to compress without breaking
Retaining rings are used to help secure sockets onto drive tools
The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced
The rotational forces are between the drive tool and the socket
They are not intended to bear any load
This action pinches the small fin or the crush gauge on these retaining rings. If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced
Frequently Bought Together

Pneumatic Flat Nose Peening Tool 4"
Couldn't load pickup availability

Pneumatic Needle Scaler Adapter Tool 9"
Couldn't load pickup availability

Pneumatic Peening Tool 6"
Couldn't load pickup availability

Impact Retaining Ring, 3/4" Drive, 1-5/8"
Couldn't load pickup availability

Hex Head Sheet Metal Screw with 16mm Washer Steel
Couldn't load pickup availability

Nylon Cable Tie 11-3/4" Black
Couldn't load pickup availability

Front Fender Push-Type Retainer Nylon 18mm
Couldn't load pickup availability

3/4" Drive Deep Impact Socket, 1"
Couldn't load pickup availability

1/2" Drive Deep Impact Socket, 5/8"
Couldn't load pickup availability

1/2" Drive Standard Impact Socket, 30mm
Couldn't load pickup availability

Cryobit 1/8" Dia. Maintenance Drill Bit , 135o Split Point, No Flats
Couldn't load pickup availability

Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability

18V Impact Wrench Kit
Couldn't load pickup availability
Product Description
Cracked sockets and or worn drive tools cause each other to turn excessively in relation to each other Designed with a resin crush gauge to help identify when to replace worn sockets
Drive tool and socket should line up when in use and should not pinch the crush gauge
One piece construction, no loose parts
Pin is made of resin which allows the material to compress without breaking
Retaining rings are used to help secure sockets onto drive tools
The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced
The rotational forces are between the drive tool and the socket
They are not intended to bear any load
This action pinches the small fin or the crush gauge on these retaining rings. If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced
Technical Specifications
Item#: | 1225104 |
---|---|
Type | Retaining Ring |
Drive Size | 3/4 " |
Length | 1.812 " |
UPC | 662679978020 |
Socket Groove Diameter | 1 5/8 " |
UNSPSC #: | 27000000 |
TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
