3/8"x4-1/2" Carbide Tire Router 2-1/2" Length of Cut
(Pack of 1)

Kent Automotive

Carbide cutters are used to drill, prep, and smooth the injury location on the tire, while providing the correct size to properly patch the hole.
• Centering carbide router system allows for full control on convex surfaces
• Cone shaped endpoint allows for the pierced hole to be enlarged to stem size
• Specially designed flute geometry enables the effective grinding of rubber and steel belt sections of tires
• Long reach and tapered shanks for ease of use
Not using the correct size or tool can lead to a leak and failed tire repair.

Check Availability

Quantity

California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov

Catalog page#: N5-2

Frequently Bought Together

Hex Head Sheet Metal Screw with 16mm Washer Steel

Front/Rear Bumper Push-Type Retainer Nylon 20mm

Air Distributor Defroster Push-Type Retainer

Hex Head Sheet Metal Screw with 16mm Washer Steel

Front/Rear Bumper Push-Type Retainer Nylon 20mm

Air Distributor Defroster Push-Type Retainer

Quick Seal 2000 Sprayable Seam Sealer Beige

Adhesive-Back Shim Stock 5/16 x 1" x 30'

DTM Primer Tan

Shield Push-Type Retainer with Metal Insert

Metric Indented Hex Head Bolt with 17mm Washer

Bumper Clip Push-Type Retainer Nylon 18mm

Tire Repair Buffing Solution 16oz

Tubeless Tire Snap-In Valve 1-1/2"

Tire Repair Light Duty Carbide Buffing Wheel

3/8" Quick Change Adapter with Set Screw

1/4" Quick Change Adapter with Set Screw

1/8" Quick Change Adapter with Set Screw

Product Description

Carbide cutters are used to drill, prep, and smooth the injury location on the tire, while providing the correct size to properly patch the hole.
• Centering carbide router system allows for full control on convex surfaces
• Cone shaped endpoint allows for the pierced hole to be enlarged to stem size
• Specially designed flute geometry enables the effective grinding of rubber and steel belt sections of tires
• Long reach and tapered shanks for ease of use
Not using the correct size or tool can lead to a leak and failed tire repair.

Technical Specifications

Item#:	1635539
Type	Tire Router
Material	Carbide
Construction	Solid
Shape	TR
Cutting Diameter	3/8 "
Overall Length	4-1/2 "
Shank Size	3/8 "
Length of Cut	2-1/2 "
UNSPSC #:	23251706
TAA Compliant:	Yes
Weight:	0.11 lb

Product Restrictions

California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov

Suggested Products

Rear Bumper Cover Retainer Plastic 18mm

Bumper and Wheel Well Liner Push-Type Retainer

Engine Under Cover Drive Rivet Plastic 7mm Hole

Woven Polyester Electrical Tape 19mm x 25m

Bumper Fascia General Purpose Split Rivet 3/16"

Fender Apron Drive Rivet 8mm Hole

Front Fender Push-Type Retainer Nylon 20mm

Fender Bumper Shield Retainer 11/16"

Drive Rivet Nylon M8

Specialty Rivet with Plastic Cap Aluminum 3.2mm

Inner Fender Shield Attaching Clip Nylon Black

Bumper Radiator and Grille Drive Rivet 7mm Hole

Your Recently Viewed Items