9200 Low Temp ROCEpoxy Coating Gloss Blue 5 Gallon
(Pack of
1)
SKU:1709717 Item#: 1709717
Immersion grade and is certified for use in potable water storage tanks of 40,000-gallon capacity or larger (in some colors). The coating must cure for 7 days at a minimum of 75°F.
• High solids, self-priming, direct-to-metal application
• Low temperature cure as low as 20°f
• Ultra-smooth, gloss finish
• Excellent surface wetting and good early moisture resistance
• Practical Coverage at Recommended DFT: 140-225 sq ft/gal (3.4-5.5 m²/l), Assumes 15% Material Loss
• Dry Time at 75°F (24°C) and 50% Relative Humidity (Touch): 30 Minutes
• Dry Time at 75°F (24°C) and 50% Relative Humidity (Handle): 3 Hours
• Dry Time at 75°F (24°C) and 50% Relative Humidity (Recoat): 45 Minutes-180 Days, Maximum 30 Days for Immersion Service
• Dry Time at 75°F (24°C) and 50% Relative Humidity (Immersion): 7 Days at 75°F (24°C); 3 Days at Temperatures Above 90°F (32°C)
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
Frequently Bought Together
Total Rubber Clean Silicone Free Rubber Cleaner
$0.00
Couldn't load pickup availability
Glass Kleen HD
$0.00
Couldn't load pickup availability
Square Turbo Mixer 21 Element with Integrated Nut
$0.00
Couldn't load pickup availability
Weld-Thru Self Etching Primer 15oz
$0.00
Couldn't load pickup availability
Crash Wrap Plastic Film Roll 5mil x 200'
$0.00
Couldn't load pickup availability
Euro-Blackâ„¢ Flat Finish 15oz
$0.00
Couldn't load pickup availability
Inner Panel Rustproofer LV 16.5oz
$0.00
Couldn't load pickup availability
DTM Primer Gray
$0.00
Couldn't load pickup availability
Heavy Duty Rustproofer 17.25oz
$0.00
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Bumper Radiator and Grille Drive Rivet 7mm Hole
$0.00
Couldn't load pickup availability
Push-Type Retainer Nylon 16 x 19mm
$0.00
Couldn't load pickup availability
Product Description
Immersion grade and is certified for use in potable water storage tanks of 40,000-gallon capacity or larger (in some colors). The coating must cure for 7 days at a minimum of 75°F.• High solids, self-priming, direct-to-metal application
• Low temperature cure as low as 20°f
• Ultra-smooth, gloss finish
• Excellent surface wetting and good early moisture resistance
• Practical Coverage at Recommended DFT: 140-225 sq ft/gal (3.4-5.5 m²/l), Assumes 15% Material Loss
• Dry Time at 75°F (24°C) and 50% Relative Humidity (Touch): 30 Minutes
• Dry Time at 75°F (24°C) and 50% Relative Humidity (Handle): 3 Hours
• Dry Time at 75°F (24°C) and 50% Relative Humidity (Recoat): 45 Minutes-180 Days, Maximum 30 Days for Immersion Service
• Dry Time at 75°F (24°C) and 50% Relative Humidity (Immersion): 7 Days at 75°F (24°C); 3 Days at Temperatures Above 90°F (32°C)
Technical Specifications
| Item#: | 1709717 |
|---|---|
| Manufacturer Model #: | 318207 |
| Type | Industrial Epoxy Coating |
| Container Type | Can/Pail |
| Size | 5 gal |
| Color | Blue |
| Physical Form | Liquid |
| Temperature Range | 20-100 °F |
| Dry Time (To Touch) | 24 h |
| Length | 6.625 " |
| Cure Time | 3-7 h |
| UNSPSC #: | 13111001 |
| TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
This item cannot be sold in the following regions: CA
