9200 Low Temp ROCEpoxy Coating Gloss White 5 Gallon
(Pack of
1)
SKU:1709719 Item#: 1709719
Immersion grade and is certified for use in potable water storage tanks of 40,000-gallon capacity or larger (in some colors). The coating must cure for 7 days at a minimum of 75°F.
• High solids, self-priming, direct-to-metal application
• Low temperature cure as low as 20°f
• Ultra-smooth, gloss finish
• Excellent surface wetting and good early moisture resistance
• Practical Coverage at Recommended DFT: 140-225 sq ft/gal (3.4-5.5 m²/l), Assumes 15% Material Loss
• Dry Time at 75°F (24°C) and 50% Relative Humidity (Touch): 30 Minutes
• Dry Time at 75°F (24°C) and 50% Relative Humidity (Handle): 3 Hours
• Dry Time at 75°F (24°C) and 50% Relative Humidity (Recoat): 45 Minutes-180 Days, Maximum 30 Days for Immersion Service
• Dry Time at 75°F (24°C) and 50% Relative Humidity (Immersion): 7 Days at 75°F (24°C); 3 Days at Temperatures Above 90°F (32°C)
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
Frequently Bought Together
Leak Trace Powder Colorless 7.5oz
$0.00
Couldn't load pickup availability
Super Bondâ„¢ Instant Adhesive Black 1oz
$0.00
Couldn't load pickup availability
Pene-Grease Synthetic Lubricant 11oz
$0.00
Couldn't load pickup availability
High Solids Paints Gloss Black
$0.00
Couldn't load pickup availability
DTM Primer Black
$0.00
Couldn't load pickup availability
High Solids Paints Flat Black
$0.00
Couldn't load pickup availability
Rustore Rust Converter
$0.00
Couldn't load pickup availability
Zinc-Rich Weld-Through Primer
$0.00
Couldn't load pickup availability
DTM Primer Tan
$0.00
Couldn't load pickup availability
Bumper Drive Rivet Plastic 10mm Hole
$0.00
Couldn't load pickup availability
Bumper Cover Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Shield Push-Type Retainer with Metal Insert
$0.00
Couldn't load pickup availability
Product Description
Immersion grade and is certified for use in potable water storage tanks of 40,000-gallon capacity or larger (in some colors). The coating must cure for 7 days at a minimum of 75°F.• High solids, self-priming, direct-to-metal application
• Low temperature cure as low as 20°f
• Ultra-smooth, gloss finish
• Excellent surface wetting and good early moisture resistance
• Practical Coverage at Recommended DFT: 140-225 sq ft/gal (3.4-5.5 m²/l), Assumes 15% Material Loss
• Dry Time at 75°F (24°C) and 50% Relative Humidity (Touch): 30 Minutes
• Dry Time at 75°F (24°C) and 50% Relative Humidity (Handle): 3 Hours
• Dry Time at 75°F (24°C) and 50% Relative Humidity (Recoat): 45 Minutes-180 Days, Maximum 30 Days for Immersion Service
• Dry Time at 75°F (24°C) and 50% Relative Humidity (Immersion): 7 Days at 75°F (24°C); 3 Days at Temperatures Above 90°F (32°C)
Technical Specifications
| Item#: | 1709719 |
|---|---|
| Manufacturer Model #: | 316835 |
| Type | Industrial Epoxy Coating |
| Container Type | Can/Pail |
| Size | 5 gal |
| Color | White |
| Physical Form | Liquid |
| Temperature Range | 20-100 °F |
| Dry Time (To Touch) | 24 h |
| Length | 12 " |
| Cure Time | 3-7 h |
| UNSPSC #: | 13111001 |
| TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
This item cannot be sold in the following regions: CA
