ALLIGATOR® Anchor Nylon #4 to #10
(Pack of
25.0)
Flangeless Anchor
Anti-rotation fins prevent spinning while Alligator Anchor extrudes along screw in solid walls or locks open in hollow walls.
• Ideal for use in a wide variety of materials including concrete, wood, plaster, flakeboard, aerated concrete, brick, masonry, stone, drywall, cinder block, ceramic tile and stucco
Toggler® is a registered trademark of Mechanical Plastics Corp.
Tests are ultimate load. However, industry safety standards recommend 1/4 of the value for actual application. Age and condition of the material and the screw size will cause tensile strength to vary.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Sleeve Type Stud Bolt Anchor Steel 5/8 x 4-1/4"
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 3/8 x 6"
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 3/8 x 1-7/8"
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability
Conversion Kit #10-32
Couldn't load pickup availability
Hex Cap Screw Property Class 10.9 M6-1 x 16mm
Couldn't load pickup availability
Miniature Incandescent Bulb 12V 2CP
Couldn't load pickup availability
Wheel Flare Molding Clip with Sealer Nylon
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/8"
Couldn't load pickup availability
Wing Type Toggle Bolt Round Head 1/4-20 x 6"
Couldn't load pickup availability
Pin Drive Anchor Mushroom Head Nylon 1/4 x 1/2"
Couldn't load pickup availability
Wing Type Toggle Bolt Round Head #10-24 x 6"
Couldn't load pickup availability
Product Description
Flangeless AnchorAnti-rotation fins prevent spinning while Alligator Anchor extrudes along screw in solid walls or locks open in hollow walls.
• Ideal for use in a wide variety of materials including concrete, wood, plaster, flakeboard, aerated concrete, brick, masonry, stone, drywall, cinder block, ceramic tile and stucco
Toggler® is a registered trademark of Mechanical Plastics Corp.
Tests are ultimate load. However, industry safety standards recommend 1/4 of the value for actual application. Age and condition of the material and the screw size will cause tensile strength to vary.
Technical Specifications
| Item#: | 62629 |
|---|---|
| Length | 1 3/16 " |
| Type | Alligator |
| Size | 3/16 " |
| Diameter | 3/16 " |
| Material | Nylon |
| Screw Diameter | No. 4 - No. 10 " |
| Drill Size | 3/16 " |
| Anchor Size | 3/16 " |
| Tensile Pull-Out Strength | 2,316 lb |
| UNSPSC #: | 31162103 |
| TAA Compliant: | Yes |
| Weight: | 0.03 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
