Epoxy Coating S60 Water Based Gloss Gray 1 Gallon
(Pack of
2)
SKU:1710423 Item#: 1710423
This water-based formula contains low VOCs, low HAPs1 and low solvent odor and creates a tough, high-gloss finish.
• High-performance coating-ideal for surfaces that are subjected to frequent wash-downs
• Impervious to moisture; easily cleaned and sanitized
• Dries fast-30 minutes to touch, return to service in 24 hours
• Easy-to-use, two-component system-order tint base and activator separately
• Satin finishes represent sierra s62 system
• Achieve maximum performance by starting with an s70 or s71 primer
• Practical Coverage at Recommended DFT (assumes 15% material loss): 230-340 sq. ft./gal. (5.7-8.4 m²/l), 135-195 sq. ft./gal. (3.3-4.8 m²/l), 225-340 sq. ft./gal. (5.5-8.4 m²/l)
• Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Tack Free: 15-45 Minutes
• Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Dries Hard: 1.5-2 Hours
• Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Recoat: 1-3 Hours, clear finishes must be dry to the point where the coating is free of any remaining milkiness before recoating. If recoat time exceeds 72 hours, scuff sand prior to recoating
• Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Foot Traffic - Light Foot Traffic: 3 hours, Normal Foot Traffic: 24 Hours
• Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Full Traffic: 72 hours, full chemical resistance will take 10-14 Days
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Pump Action Sprayer 1L
$0.00
Couldn't load pickup availability
Speedy 500 Adhesive Remover 15oz
$0.00
Couldn't load pickup availability
Plastic Quick Fix Plastic Repair Adhesive 10fl.oz
$0.00
Couldn't load pickup availability
2K Epoxy Primer Filler Light Gray
$0.00
Couldn't load pickup availability
Aerosol Extension Wand Kit
$0.00
Couldn't load pickup availability
High Solids Paints Gloss White
$0.00
Couldn't load pickup availability
S62 Water Based Epoxy Activator Satin 1 Gallon
$0.00
Couldn't load pickup availability
High Solids PolyUrea Floor Coating Primer Summer Clear 15 Gallon
$0.00
Couldn't load pickup availability
Maintenance Coating S60 Water Based Gloss Stone Gray 1 Gallon
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Fender and Bumper Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Hex Head Sheet Metal Screw with 16mm Washer Steel
$0.00
Couldn't load pickup availability
Product Description
This water-based formula contains low VOCs, low HAPs1 and low solvent odor and creates a tough, high-gloss finish.• High-performance coating-ideal for surfaces that are subjected to frequent wash-downs
• Impervious to moisture; easily cleaned and sanitized
• Dries fast-30 minutes to touch, return to service in 24 hours
• Easy-to-use, two-component system-order tint base and activator separately
• Satin finishes represent sierra s62 system
• Achieve maximum performance by starting with an s70 or s71 primer
• Practical Coverage at Recommended DFT (assumes 15% material loss): 230-340 sq. ft./gal. (5.7-8.4 m²/l), 135-195 sq. ft./gal. (3.3-4.8 m²/l), 225-340 sq. ft./gal. (5.5-8.4 m²/l)
• Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Tack Free: 15-45 Minutes
• Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Dries Hard: 1.5-2 Hours
• Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Recoat: 1-3 Hours, clear finishes must be dry to the point where the coating is free of any remaining milkiness before recoating. If recoat time exceeds 72 hours, scuff sand prior to recoating
• Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Foot Traffic - Light Foot Traffic: 3 hours, Normal Foot Traffic: 24 Hours
• Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Full Traffic: 72 hours, full chemical resistance will take 10-14 Days
Technical Specifications
| Item#: | 1710423 |
|---|---|
| Manufacturer Model #: | 208072 |
| Type | Water Base Epoxy Maintenance Floor Coating |
| Container Type | Can |
| Size | 1 gal |
| Color | Classic Gray |
| Coverage | 225-340 ft² |
| Physical Form | Liquid |
| Work Time | 2 h |
| Cure Time | 72 h |
| UNSPSC #: | 31201710 |
| TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
