Epoxy Coating S60 Water Based Satin Clear 1 Gallon
(Pack of
2)
SKU:1710421 Item#: 1710421
This water-based formula contains low VOCs, low HAPs1 and low solvent odor and creates a tough, high-gloss finish.
• High-performance coating-ideal for surfaces that are subjected to frequent wash-downs
• Impervious to moisture; easily cleaned and sanitized
• Dries fast-30 minutes to touch, return to service in 24 hours
• Easy-to-use, two-component system-order tint base and activator separately
• Satin finishes represent sierra s62 system
• Achieve maximum performance by starting with an s70 or s71 primer
• Practical Coverage at Recommended DFT (assumes 15% material loss): 230-340 sq. ft./gal. (5.7-8.4 m²/l), 135-195 sq. ft./gal. (3.3-4.8 m²/l), 225-340 sq. ft./gal. (5.5-8.4 m²/l)
• Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Tack Free: 15-45 Minutes
• Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Dries Hard: 1.5-2 Hours
• Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Recoat: 1-3 Hours, clear finishes must be dry to the point where the coating is free of any remaining milkiness before recoating. If recoat time exceeds 72 hours, scuff sand prior to recoating
• Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Foot Traffic - Light Foot Traffic: 3 hours, Normal Foot Traffic: 24 Hours
• Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Full Traffic: 72 hours, full chemical resistance will take 10-14 Days
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Crash Wrap Plastic Film Roll 3mil x 200'
$0.00
Couldn't load pickup availability
Flex-E-6115 Controlled Flow Seam Sealer
$0.00
Couldn't load pickup availability
Plastic Quick Fix Plastic Repair Adhesive
$0.00
Couldn't load pickup availability
Kent Orange Engine Degreaser
$0.00
Couldn't load pickup availability
High Solids Paints Semi-Gloss Black
$0.00
Couldn't load pickup availability
DTM Primer White
$0.00
Couldn't load pickup availability
Epoxy Activator 100% VOC 6500 Tan 1 Gallon
$0.00
Couldn't load pickup availability
6700 Concrete Decorative Epoxy Gray 15 Gallon
$0.00
Couldn't load pickup availability
5800 Floor Coating WB PolyUrethane Tile Red 1 Gallon Kit
$0.00
Couldn't load pickup availability
Engine Under Cover Drive Rivet Plastic 7mm Hole
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Drive Rivet Nylon M8
$0.00
Couldn't load pickup availability
Product Description
This water-based formula contains low VOCs, low HAPs1 and low solvent odor and creates a tough, high-gloss finish.• High-performance coating-ideal for surfaces that are subjected to frequent wash-downs
• Impervious to moisture; easily cleaned and sanitized
• Dries fast-30 minutes to touch, return to service in 24 hours
• Easy-to-use, two-component system-order tint base and activator separately
• Satin finishes represent sierra s62 system
• Achieve maximum performance by starting with an s70 or s71 primer
• Practical Coverage at Recommended DFT (assumes 15% material loss): 230-340 sq. ft./gal. (5.7-8.4 m²/l), 135-195 sq. ft./gal. (3.3-4.8 m²/l), 225-340 sq. ft./gal. (5.5-8.4 m²/l)
• Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Tack Free: 15-45 Minutes
• Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Dries Hard: 1.5-2 Hours
• Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Recoat: 1-3 Hours, clear finishes must be dry to the point where the coating is free of any remaining milkiness before recoating. If recoat time exceeds 72 hours, scuff sand prior to recoating
• Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Foot Traffic - Light Foot Traffic: 3 hours, Normal Foot Traffic: 24 Hours
• Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity - Full Traffic: 72 hours, full chemical resistance will take 10-14 Days
Technical Specifications
| Item#: | 1710421 |
|---|---|
| Manufacturer Model #: | 208084 |
| Type | Water Base Epoxy Maintenance Floor Coating |
| Container Type | Can |
| Size | 1 gal |
| Color | Clear |
| Coverage | 225-340 ft² |
| Physical Form | Liquid |
| Work Time | 2 h |
| Cure Time | 72 h |
| UNSPSC #: | 31201710 |
| TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
