Fiberglass Paint Booth Filter Roll
(Pack of 1)

Kent Automotive

Exhaust filters ensure the air leaving the spray booth is safe, and keeps paints and coatings from escaping. These filters are long-lasting and very efficient for all automotive paints and coatings. Changing the filters every two weeks is recommended to help prevent clogged filters, which can lead to overspray, and keeping paint from leaving the booth.
• High particle removal efficiency (over 99%)
• High overspray removal efficiency
• Great for waterborne coating applications
• Maximum filter longevity and holding capacity
• Maintains consistent air flow and booth balance
• 2.5" fiber structure and design
• 18g filter density
Meets or exceeds EPA Standard 40 CFR Part 63

Check Availability

Quantity

Frequently Bought Together

Front Bumper Drive Rivet Plastic 10mm Hole

Shroud Insulating Button Nylon 11/16"

Hex Head Sheet Metal Screw with 17mm Washer Steel

Fiberglass Paint Booth Filter Roll

Fiberglass Paint Booth Filter Roll

Paint Booth Kit 3/8" x 35ft

Instant Gasket Maker Black 10oz

Flexseal RTV Silicone Sealant Clear 10.3oz

Steel Adhesive Wheel Weight Roll 1500 Segment/Roll

Front Bumper Drive Rivet Plastic 10mm Hole

Shroud Insulating Button Nylon 11/16"

Hex Head Sheet Metal Screw with 17mm Washer Steel

Aluminum Washers - 14x22

Megaspansion II Gray

Item#: EG57563301

Cut-Off Wheel Dispenser For 4-1/2" Diameter Wheels-Kent

Molding Clip with Sealer Nylon White 11.5 x 21

Bumper Drive Rivet Plastic 10mm Hole

Nylon Cable Tie 7-1/2" Black

Fiberglass Paint Booth Filter Roll

Paint Booth Kit 3/8" x 35ft

Fiberglass Paint Booth Filter Pad

Product Description

Exhaust filters ensure the air leaving the spray booth is safe, and keeps paints and coatings from escaping. These filters are long-lasting and very efficient for all automotive paints and coatings. Changing the filters every two weeks is recommended to help prevent clogged filters, which can lead to overspray, and keeping paint from leaving the booth.
• High particle removal efficiency (over 99%)
• High overspray removal efficiency
• Great for waterborne coating applications
• Maximum filter longevity and holding capacity
• Maintains consistent air flow and booth balance
• 2.5" fiber structure and design
• 18g filter density
Meets or exceeds EPA Standard 40 CFR Part 63

Technical Specifications

Item#:	1636263
Type	Roll
Material	Fiberglass
Size	20.5" x 100'
Thickness	2.5 "
UNSPSC #:	40161524
TAA Compliant:	No
Weight:	9.0 lb

Suggested Products

Rear Bumper Cover Retainer Plastic 18mm

Bumper and Wheel Well Liner Push-Type Retainer

Engine Under Cover Drive Rivet Plastic 7mm Hole

Woven Polyester Electrical Tape 19mm x 25m

Bumper Fascia General Purpose Split Rivet 3/16"

Fender Apron Drive Rivet 8mm Hole

Fender Bumper Shield Retainer 11/16"

Front Fender Push-Type Retainer Nylon 20mm

Drive Rivet Nylon M8

Specialty Rivet with Plastic Cap Aluminum 3.2mm

Inner Fender Shield Attaching Clip Nylon Black

Bumper Radiator and Grille Drive Rivet 7mm Hole

Your Recently Viewed Items