Flap Band, Use on Die Grinder, Deburring, Grinding at 90° Angle, Zirconium Grain, 40 Grit, 2-1/2" Diameter, 1-3/16" Width
(Pack of
1)
SKU:28104 Item#: 28104
Multiple flaps of high-quality abrasive cloth layered onto a circular base. This design significantly increases the amount of material being used, for longer flap band life. The overlapping flaps and zirconium grain grind cooler. As the flaps wear away, fresh grain is exposed, resulting in a constant rate of stock removal and consistent scratch pattern throughout the life of the product.
• Zirconium grain
• One-step grinding and finishing
• Very aggressive stock removal
• For use on a die grinder
Applications:
• Finishing weld seams
• Deburring
• Rust and scale removal
• Grinding at 90° angle
• Blending irregular shapes and inside radii
NOTE: Rubber drum is required.
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Couldn't load pickup availability
Catalog page#: 3-19
Frequently Bought Together
Flexible Grinding Disc 4-1/2"
Couldn't load pickup availability
Flexible Grinding Disc 4"
Couldn't load pickup availability
Premium Grinding Wheel 5"
Couldn't load pickup availability
Curved Wood Handle Scratch Brush
Couldn't load pickup availability
Aluminum Oxide Grain Locking Grinding Disc 2"
Couldn't load pickup availability
Cryobit 1/4" Dia. Maintenance Drill Bit , 135o Split Point, W/ Flats
Couldn't load pickup availability
1" Dia. X 1" Wide, Flap Wheel, 120 Grit, 1/4" Shank
Couldn't load pickup availability
Mounted Cup Style Flap Wheel 2-1/2"
Couldn't load pickup availability
Flap Band 2-1/2"
Couldn't load pickup availability
Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability
Radiator Grille Nut M4.2-1.41
Couldn't load pickup availability
Fender Splash Shield Retainer Nylon 20mm
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-3/4" (M8)
Couldn't load pickup availability
9" Hi-Level Heavy-Duty Power Jaw Plier-Cutter
Couldn't load pickup availability
1/4" Cordless Impact Hex Driver Charging Bundle
Couldn't load pickup availability
Product Description
Multiple flaps of high-quality abrasive cloth layered onto a circular base. This design significantly increases the amount of material being used, for longer flap band life. The overlapping flaps and zirconium grain grind cooler. As the flaps wear away, fresh grain is exposed, resulting in a constant rate of stock removal and consistent scratch pattern throughout the life of the product.• Zirconium grain
• One-step grinding and finishing
• Very aggressive stock removal
• For use on a die grinder
Applications:
• Finishing weld seams
• Deburring
• Rust and scale removal
• Grinding at 90° angle
• Blending irregular shapes and inside radii
NOTE: Rubber drum is required.
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
| Item#: | 28104 |
|---|---|
| Type | Flap Band |
| Diameter | 2-1/2 " |
| Width | 1-3/16 " |
| Grit | 40 |
| Maximum RPM | 12,700 |
| Grain | Zirconium |
| Aluminum Approved | Yes |
| UNSPSC #: | 31191507 |
| TAA Compliant: | Yes |
| Weight: | 0.11 lb |
