Flow Form Heat Shrink Tubing 12 to 10 AWG Red
(Pack of
5.0)
• 3:1 shrink ratio
• Prevents failure due to corrosion, vibration, abrasion and strain
• Sturdy dual wall construction – the outer wall shrinks, providing strength, rigidity and abrasion resistance, while the inner wall provides a water-resistant seal to keep out contaminants and water
• Chemical-resistant – not affected by road salt, oil, diesel fuel, gasoline, dust, moisture and battery acid
• Easy to install – shrinks with a heat gun, torch or other heat source
• Color-coded for easy size identification
• Easily cuts to size
• High dielectric strength: 500V/mil; up to 16,000V per application
• Temperature range: –67°F to +230°F (–55°C to +110°C)
• Voltage rating in USA 600V; in Canada 32V
Applications
• Electrical terminals and connectors exposed to corrosion, pull-out or vibration
• Repair welding cables and insulate stingers and lugs
• Installation and repair of vehicular equipment wiring and lights
• Strain relief for robotic applications
• Insulate tool handles to reduce electric shock
• Seal butt connectors for in-line splices
Wire gauge coverage is approximate due to the wide variance of wire thicknesses.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 2-7
Frequently Bought Together
Butt Connector 22 to 18 AWG
Couldn't load pickup availability
Energizer® AA Alkaline Battery 1.5V
Couldn't load pickup availability
H3 Halogen Miniature Bulb 70W 24V
Couldn't load pickup availability
3/8 x 4" Red Thermapod Heat Shrink Tube
Couldn't load pickup availability
Heat Shrink Tubing Clear 0.6 x 12"
Couldn't load pickup availability
Flow Form Heat Shrink Tubing 2 to 4/0 AWG Black
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 11.5 x 21
Couldn't load pickup availability
Rocker Molding Clip with Sealer Nylon Gray 12mm
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Adhesive Heat Shrink Tubing Black 1.25 x 12"
Couldn't load pickup availability
Rubber Grommet 11/16" ID
Couldn't load pickup availability
Rubber Grommet 11/16" ID
Couldn't load pickup availability
Product Description
• 3:1 shrink ratio• Prevents failure due to corrosion, vibration, abrasion and strain
• Sturdy dual wall construction – the outer wall shrinks, providing strength, rigidity and abrasion resistance, while the inner wall provides a water-resistant seal to keep out contaminants and water
• Chemical-resistant – not affected by road salt, oil, diesel fuel, gasoline, dust, moisture and battery acid
• Easy to install – shrinks with a heat gun, torch or other heat source
• Color-coded for easy size identification
• Easily cuts to size
• High dielectric strength: 500V/mil; up to 16,000V per application
• Temperature range: –67°F to +230°F (–55°C to +110°C)
• Voltage rating in USA 600V; in Canada 32V
Applications
• Electrical terminals and connectors exposed to corrosion, pull-out or vibration
• Repair welding cables and insulate stingers and lugs
• Installation and repair of vehicular equipment wiring and lights
• Strain relief for robotic applications
• Insulate tool handles to reduce electric shock
• Seal butt connectors for in-line splices
Wire gauge coverage is approximate due to the wide variance of wire thicknesses.
Technical Specifications
| Item#: | P32325 |
|---|---|
| Type | Pre-Cut |
| Style | Dual Wall |
| Wire Gauge Coverage | 12-10 AWG |
| Length | 2 ft |
| Color | Red |
| I.D. Before Shrinkage | 3/8 " |
| I.D. After Shrinkage | 1/8 " |
| Shrink Ratio | 3 to 1 |
| Wall Thickness Before Shrinkage | 0.025 " |
| Wall Thickness After Shrinkage | 0.050 " |
| Dielectric Strength | 500 - 16,000 V/mm |
| Voltage Rating | 600 V |
| Temperature Rating | -67°F to 230°F/ -55°C to 110°C |
| UNSPSC #: | 39121723 |
| TAA Compliant: | Yes |
| Weight: | 0.16 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
