Hex Cap Screw, Grade 8, Alloy Steel, Zinc Finish, Coarse Thread, 9/32" Head Height, 9/16" Across Flats, 3/8-16 x 3/4"
(Pack of
100)
• Most versatile, best value for standard maintenance operations
• High-strength matched component fastening system
• Fatigue/vibration-resistant UNJ thread design
• 20% higher-than-normal wrenching surface for increased safety and even distribution of torque forces
• Heat-treated, quenched and tempered
• Perma Plated for superior corrosion protection
• Proprietary head marking for improved traceability
• Trailing thread does not enter the extrusion angle
• Increased length of chamfer allows easier alignment and assembly
• Matched strength nuts, flat washers and lock nuts available
• Minimum 150,000 PSI tensile strength
• Manufactured to meet or exceed Grade 8 strength requirements
Minimum Threaded Length – Up to 6" Long: (2 x Diameter) + 1/4"; Over 6" Long: (2 x Diameter) + 1/2
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Catalog page#: 11-8
Frequently Bought Together
Hex Flange Bolt Grade 10.9 M10-1.25 x 35mm
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 35mm
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 40mm
Couldn't load pickup availability
Hex Cap Screw Grade 8 Alloy Steel 3/8-16 x 1"
Couldn't load pickup availability
Hex Cap Screw Grade 8 Alloy Steel 3/8-16 x 2-1/2"
Couldn't load pickup availability
Hex Cap Screw Grade 10.9 Alloy Steel M8-1.25 x 30mm
Couldn't load pickup availability
DIN 125A Flat Washer Grade 140 HV M6
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 20mm
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 3/16"
Couldn't load pickup availability
Bumper Radiator and Grille Drive Rivet 7mm Hole
Couldn't load pickup availability
Specialty Rivet with Plastic Cap Aluminum 3.2mm
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
Couldn't load pickup availability
Product Description
• Most versatile, best value for standard maintenance operations• High-strength matched component fastening system
• Fatigue/vibration-resistant UNJ thread design
• 20% higher-than-normal wrenching surface for increased safety and even distribution of torque forces
• Heat-treated, quenched and tempered
• Perma Plated for superior corrosion protection
• Proprietary head marking for improved traceability
• Trailing thread does not enter the extrusion angle
• Increased length of chamfer allows easier alignment and assembly
• Matched strength nuts, flat washers and lock nuts available
• Minimum 150,000 PSI tensile strength
• Manufactured to meet or exceed Grade 8 strength requirements
Minimum Threaded Length – Up to 6" Long: (2 x Diameter) + 1/4"; Over 6" Long: (2 x Diameter) + 1/2
Technical Specifications
| Item#: | 631 |
|---|---|
| Style | Premium |
| Diameter | 3/8 " |
| Thread Pitch | 16 |
| Thread | Coarse |
| Length | 3/4 " |
| Type | Hex Cap Screw |
| Across Flats | 9/16 " |
| Material | Alloy Steel |
| Grade | 8 |
| Finish | Bright Zinc |
| Tensile Strength | 150,000 PSI |
| Head Style | High Hex |
| Head Height | 9/32 " |
| Thread Form | UNJ |
| Thread Length | Full |
| Thread Length Minimum | Full |
| UNSPSC #: | 31161501 |
| TAA Compliant: | Yes |
| Weight: | 3.85 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
