Home Fasteners Bolts Cap Screws Hex Cap Screw Grade 9 Alloy Steel 3/8-24 x 3/4"
Bolts
DV_ZoomOriginal_P_32504_WB.jpg
DV_ZoomOriginal_P_32504_AP4.jpg
DV_ZoomOriginal_P_32504_AP2.jpg
DV_ZoomOriginal_P_32504_AP1.jpg
DV_ZoomOriginal_P_32504_AP3.jpg
DV_ZoomOriginal_P_32504_AS1.jpg
DV_ZoomOriginal_P_32504_CP3.jpg
DV_ZoomOriginal_P_32504_CP2.jpg
DV_ZoomOriginal_P_32504_CP1.jpg
DV_ZoomOriginal_P_32504_WB.jpg
DV_ZoomOriginal_P_32504_AP4.jpg
DV_ZoomOriginal_P_32504_AP2.jpg
DV_ZoomOriginal_P_32504_AP1.jpg
DV_ZoomOriginal_P_32504_AP3.jpg
DV_ZoomOriginal_P_32504_AS1.jpg
DV_ZoomOriginal_P_32504_CP3.jpg
DV_ZoomOriginal_P_32504_CP2.jpg
DV_ZoomOriginal_P_32504_CP1.jpg
Maintenance Engineered Fastening Systems

Hex Cap Screw, Grade 9, Alloy Steel, Zinc Finish, Fine Thread, 9/32" Head Height, 9/16" Across Flats, 3/8-24 x 3/4"
(Pack of 100)

Item#: A831

Tru-Torq®

• Ultra-high-strength matched component fastening system
• 20% stronger than Grade 8
• Fatigue/vibration-resistant UNJ thread design
• 20% higher-than-normal wrenching surface for increased safety and even distribution of torque forces
• Heat-treated, quenched and tempered
• Perma Plated for superior corrosion protection
• Proprietary head marking for improved traceability
• Diameter marked on head for easy identification
• Trailing thread does not enter the extrusion angle
• Increased length of chamfer allows easier alignment and assembly
• Matched strength nuts, flat washers and lock nuts available
• Minimum 180,000 PSI tensile strength
• Exceeds SAE, ASTM and Military Grade 8 strength requirements
• Designed for the most demanding maintenance requirements
• For use in critical applications
Minimum Threaded Length – Up to 6" Long: (2 x Diameter) + 1/4"; Over 6" Long: (2 x Diameter) + 1/2

Read More
Check Availability

California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Catalog page#: 11-6

Frequently Bought Together

DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 20mm

Item#: 28680
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M10-1.25 x 20mm

Item#: 55607
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M10-1.25 x 40mm

Item#: 55609
DV_ZoomOriginal_P_6610.jpg

Hex Cap Screw Grade 10.9 Alloy Steel M6-1 x 12mm

Item#: 10203
DV_ZoomOriginal_P_6610.jpg

Hex Cap Screw Grade 10.9 Alloy Steel M10-1.5 x 30mm

Item#: 10225
DV_ZoomOriginal_P_517.jpg

Hex Cap Screw Property Class 8.8 M10-1.5 x 35mm

Item#: 61271
DV_ZoomOriginal_P_30780.jpg

Open End Rivet Dome Head Aluminum 3/16"

Item#: 485
DV_ZoomOriginal_P_11056.jpg

Serrated Hex Flange Nut Alloy Steel M6-1

Item#: 28699
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 16mm

Item#: 28679
DV_ZoomOriginal_I_DY89310354.jpg

9" Hi-Level Heavy-Duty Power Jaw Plier-Cutter

Item#: DY89310354
DV_ZoomOriginal_I_DY89310460.jpg

Spinning Handmaster Driver Set 5Pc Set

Item#: DY89310460
DV_ZoomOriginal_I_DY80170030.jpg

1/4" - 3/4" Cryonitride Spiral Fluted Step Drill - 3/8" Shank

Item#: DY80170030
DV_ZoomOriginal_P_519.jpg

Hex Nut Grade 8 Steel M10-1.5

Item#: 4305
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 12mm

Item#: 28678
DV_ZoomOriginal_P_31311.jpg

Hex Nut Grade 8 Alloy Steel 1/4-20

Item#: A100
DV_ZoomOriginal_I_1468633.jpg

Push-Type Retainer Nylon 16 x 19mm

Item#: 1468633
DV_ZoomOriginal_I_KT13747.jpg

Bumper Fascia General Purpose Split Rivet 3/16"

Item#: KT13747
DV_ZoomOriginal_I_KT14296.jpg

Fender Splash Shield Push Rivet Nylon 7mm Hole

Item#: KT14296

Product Description

• Ultra-high-strength matched component fastening system
• 20% stronger than Grade 8
• Fatigue/vibration-resistant UNJ thread design
• 20% higher-than-normal wrenching surface for increased safety and even distribution of torque forces
• Heat-treated, quenched and tempered
• Perma Plated for superior corrosion protection
• Proprietary head marking for improved traceability
• Diameter marked on head for easy identification
• Trailing thread does not enter the extrusion angle
• Increased length of chamfer allows easier alignment and assembly
• Matched strength nuts, flat washers and lock nuts available
• Minimum 180,000 PSI tensile strength
• Exceeds SAE, ASTM and Military Grade 8 strength requirements
• Designed for the most demanding maintenance requirements
• For use in critical applications
Minimum Threaded Length – Up to 6" Long: (2 x Diameter) + 1/4"; Over 6" Long: (2 x Diameter) + 1/2

Technical Specifications

Item#: A831
Style Premium
Diameter 3/8 "
Thread Pitch 24
Thread Fine
Length 3/4 "
Type Hex Cap Screw
Across Flats 9/16 "
Material Alloy Steel
Grade 9
Finish Bright Zinc
Tensile Strength 180,000 PSI
Head Style High Hex
Head Height 9/32 "
Thread Form UNJ
Thread Length Full
Thread Length Minimum Full
UNSPSC #: 31161501
TAA Compliant: Yes
Weight: 4.0 lb

Product Restrictions

California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Suggested Products

DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M8-1.25 x 20mm

Item#: 55603
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M8-1.25 x 30mm

Item#: 55604
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M8-1.25 x 16mm

Item#: 55602
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M10-1.25 x 30mm

Item#: 55608
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 16mm

Item#: 28679
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M8-1.25 x 25mm

Item#: 28687
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 12mm

Item#: 28678
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 25mm

Item#: 28681
DV_ZoomOriginal_P_532_WB.jpg

DIN 6921 Hex Flange Bolt Grade 8.8 M6-1 x 16mm

Item#: 59407
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 20mm

Item#: 28680
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M10-1.25 x 20mm

Item#: 55607
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M10-1.25 x 40mm

Item#: 55609

Your Recently Viewed Items