High Solids Paints New Farm and Implement Green
(Pack of
1.0)
Provides the bet coverage and finish performance in the aerosol paint industry.
Lawson’s High Solids save money with the lowest cost-per-square-foot coverage.
Best Performance In a side-by-side comparison, Lawson’s formulations exceed solids content found in top-of-the-line popular brands. This gives High Solids the best coverage and finish performance in the aerosol paint industry!
Fewer Cans Needed to Do a Job!
Lawson’s High Solids also give you increased coverage per can, reducing the number of cans needed to do a job. Typical low solids paint brands often require up to four 16 oz. cans to provide coverage that one 20 oz. can of Lawson High Solids paint affords you!
• Wide color selection
• Labor-saving: Often just one coat will do!
• Tough: Passes 150-hour salt-spray test; beats top brands in gloss retention and fade resistance
Agricultural Equipment – 20 oz. can size; 16 oz. net wt. Available in package quantities of 1, 3 and 12
• Heat-resistant up to 250°F (121°C); engine paints up to 350°F (177°C); high-temperature up to 1,200°F (649°C)
For agricultural equipment restoration and maintenance.
NOTE: Actual colors may vary in shade from colors shown here, since these are ink reproductions.
Play it Safe! Wear safety glasses whenever spray painting.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
Catalog Page#: 1-38
Frequently Bought Together
High Temperature High Solids Paints Black
Couldn't load pickup availability
Inverted Tip Marking Paint Pink
Couldn't load pickup availability
Cast Finish Acrylic Lacquer Gray
Couldn't load pickup availability
High-Tech Seam Sealer Clear 11fl.oz
Couldn't load pickup availability
Ultra-Stick No Drip Contact Wet/Dry Adhesive Clear
Couldn't load pickup availability
Spray Leak Chekâ„¢ Water Leak Sealer 17.75oz
Couldn't load pickup availability
High Solids Paints Omaha Orange
Couldn't load pickup availability
High Solids Paints Old Farm and Implement Green
Couldn't load pickup availability
High Solids Paints Ford New Holland Yellow
Couldn't load pickup availability
Hex Head Sheet Metal Screw with 16mm Washer Steel
Couldn't load pickup availability
Front Fender Liner Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability
Product Description
Provides the bet coverage and finish performance in the aerosol paint industry.Lawson’s High Solids save money with the lowest cost-per-square-foot coverage.
Best Performance In a side-by-side comparison, Lawson’s formulations exceed solids content found in top-of-the-line popular brands. This gives High Solids the best coverage and finish performance in the aerosol paint industry!
Fewer Cans Needed to Do a Job!
Lawson’s High Solids also give you increased coverage per can, reducing the number of cans needed to do a job. Typical low solids paint brands often require up to four 16 oz. cans to provide coverage that one 20 oz. can of Lawson High Solids paint affords you!
• Wide color selection
• Labor-saving: Often just one coat will do!
• Tough: Passes 150-hour salt-spray test; beats top brands in gloss retention and fade resistance
Agricultural Equipment – 20 oz. can size; 16 oz. net wt. Available in package quantities of 1, 3 and 12
• Heat-resistant up to 250°F (121°C); engine paints up to 350°F (177°C); high-temperature up to 1,200°F (649°C)
For agricultural equipment restoration and maintenance.
NOTE: Actual colors may vary in shade from colors shown here, since these are ink reproductions.
Play it Safe! Wear safety glasses whenever spray painting.
Technical Specifications
| Item#: | 1509151 |
|---|---|
| Type | High Solids Paint |
| Container Type | Aerosol |
| Size | 16 Oz. |
| Basic Color | Green |
| Color | New Farm and Implement Green |
| Application Temperature | 50 to 90 °F |
| Dry Time (To Touch) | 10 min |
| Dry Time (Tack Free) | 30 min |
| Physical Form | Aerosol |
| Cure/Recoat Time | For best results recoat within 1 hour or after 48 hours. |
| UNSPSC #: | 31211500 |
| TAA Compliant: | Yes |
| Weight: | 1.5 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
