Hollow Wall Screw Anchor, Steel, Zinc Finish, Extra Short Style, 5/16" Drill Size, #6-32
(Pack of
100)
SKU:91612 Item#: 91612
• Zinc rust-resistant finish
1. Drill hole recommended diameter. Push anchor into hole and tap until flush with wall surface.
2. Turn screw with screwdriver – anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Frequently Bought Together
Light-Medium Duty Anchor Assortment 555Pcs
$0.00
Couldn't load pickup availability
Wallboard Anchor Assortment 1125Pcs
$0.00
Couldn't load pickup availability
Hollow Wall Screw Anchor Assortment 195Pcs
$0.00
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/16"
$0.00
Couldn't load pickup availability
DIN 125A Flat Washer Grade 140 HV M12
$0.00
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 1/4"
$0.00
Couldn't load pickup availability
Hex Head Sheet Metal Screw with 16mm Washer Steel
$0.00
Couldn't load pickup availability
Air Distributor Defroster Push-Type Retainer
$0.00
Couldn't load pickup availability
Fender Liner Screw Grommet Nylon M5.5
$0.00
Couldn't load pickup availability
ALLIGATOR® Anchor Nylon #6 to #10
$0.00
Couldn't load pickup availability
Arrow Point Drywall Anchor Steel #10
$0.00
Couldn't load pickup availability
Tamper-Proof Nail Drive Anchor Steel 1/4 x 1-1/4"
$0.00
Couldn't load pickup availability
Product Description
• Zinc rust-resistant finish1. Drill hole recommended diameter. Push anchor into hole and tap until flush with wall surface.
2. Turn screw with screwdriver – anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Technical Specifications
| Item#: | 91612 |
|---|---|
| Type | Wall Anchor |
| Body Diameter | 7/32 " |
| Diameter | 1/8 " |
| Material | Steel |
| Screw Diameter | 6-32 (1/8) Extra Short |
| Finish | Zinc |
| Drill Size | 5/16 " |
| Minimum Wall Thickness | 0 " |
| Maximum Wall Thickness | 1/4 " |
| Screw Length | 1 " |
| Wall Thickness | 0 to 3/16 " |
| Sleeve Length | 11/64 " |
| UNSPSC #: | 31162103 |
| TAA Compliant: | No |
| Weight: | 0.91 lb |
