Hollow Wall Screw Anchor, Steel, Zinc Finish, Short Style, 1/8"
(Pack of
50)
Zinc rust-resistant finish
Dual head Phillips/slotted
1. Place fastener against wall and drive in with hammer. Stop when flange rests against the face of the wall.
2. Turn screw with screwdriver anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Sleeve Type Stud Bolt Anchor Steel 5/16 x 3-1/2"
Couldn't load pickup availability
Double Expansion Shield Anchor Alloy Steel 5/16"
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 5/8 x 4-1/4"
Couldn't load pickup availability
Blind Rivet Nut Insert Thin Wall M6-1
Couldn't load pickup availability
DIN 127B Standard Lock Washer M8
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability
Fender Splash Shield Retainer Nylon 20mm
Couldn't load pickup availability
E-Z Toggle™ Self-Drilling Wall Anchor
Couldn't load pickup availability
1/4-20 Joggle-A-Toggle Plus
Couldn't load pickup availability
Wing Type Toggle Bolt Round Head 1/4-20 x 6"
Couldn't load pickup availability
Product Description
Zinc rust-resistant finish Dual head Phillips/slotted
1. Place fastener against wall and drive in with hammer. Stop when flange rests against the face of the wall.
2. Turn screw with screwdriver anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Technical Specifications
| Item#: | 91613 |
|---|---|
| Type | Wall Anchor |
| Size | 1/8 " |
| Body Diameter | 1/8 " |
| Diameter | 1/8 " |
| Material | Steel |
| Finish | Zinc |
| Minimum Wall Thickness | 1/8 " |
| Maximum Wall Thickness | 1/2 " |
| Wall Thickness | 1/8 to 1/2 " |
| UNSPSC #: | 31162103 |
| TAA Compliant: | No |
| Weight: | 0.73 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
