Large Diameter Tapcon® Anchor 1/2 x 5"
(Pack of
10)
High performance, high production, self-threading anchor
Carbon steel with zinc plating
Removable
Low slippage
High shear strength
Finished head
Vibration-resistant
Ideal for stadium seating, racking, shelving and conveyors
1. Using the correct diameter carbide tipped bit, drill a pilot hole at least 1/4" deeper than anchor embedment.
2. Using a 1/2" impact wrench, drive anchor until fully seated.
Length Identification Code is located on the anchor head for easy identification and inspection
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together

Light-Medium Duty Anchor Assortment 555Pcs
Couldn't load pickup availability

Wallboard Anchor Assortment 1125Pcs
Couldn't load pickup availability

Hollow Wall Screw Anchor Assortment 196Pcs
Couldn't load pickup availability

Open End Rivet Large Flange Head Aluminum 3/16"
Couldn't load pickup availability

Open End Rivet Dome Head Aluminum 3/16"
Couldn't load pickup availability

Hex Flange Bolt Grade 10.9 M8-1.25 x 40mm
Couldn't load pickup availability

Masonry Anchor Star Head Steel 3/16 x 3-1/4"
Couldn't load pickup availability

Masonry Anchor Phillips Head #14-10 x 1-1/4"
Couldn't load pickup availability

1/4x2-1/4 Mas-Tap Hd Anchor
Couldn't load pickup availability

Front Bumper Specialty Nut Steel M4.2-1.41
Couldn't load pickup availability

Hex Head Sheet Metal Screw with 16mm Washer Steel
Couldn't load pickup availability

Front Fender Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Product Description
High performance, high production, self-threading anchor Carbon steel with zinc plating
Removable
Low slippage
High shear strength
Finished head
Vibration-resistant
Ideal for stadium seating, racking, shelving and conveyors
1. Using the correct diameter carbide tipped bit, drill a pilot hole at least 1/4" deeper than anchor embedment.
2. Using a 1/2" impact wrench, drive anchor until fully seated.
Length Identification Code is located on the anchor head for easy identification and inspection
Technical Specifications
Item#: | 26770 |
---|---|
Diameter | 1/2 " |
Length | 5 " |
Type | Screw Anchor |
Drill Size | 7/16 " |
UNSPSC #: | 31162104 |
TAA Compliant: | Yes |
Weight: | 2.93 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov

