Masonry Anchor Hex Washer Head Steel 5/16 x 2-3/4"
(Pack of
50.0)
UltraCon+® Anchors and Drill Bits
• Fast installation – drill hole, drive anchor
• Anchors available in three head styles: Slotted hex washer head for most applications; Phillips flat head provides flush seating for countersunk applications; 5/16" hex washer head has an oversized (0.540") washer face
• Replaces expansion anchors, plugs and screws
• Hi-Lo threads provide exceptional holding strength with no spalling
• Notched cutting edges for easy installation – cuts threads into poured concrete, brick or hollow block
• Gimlet point for self drilling into wood base material
• Reversible and removable
• Stalgard®-coated for superior corrosion resistance – withstands a minimum of 800 hours of neutral salt-spray testing without evidence of red rust on significant surfaces
• Carbide-Tipped UltraCon® Masonry Hammer Drill Bits are required – these bits are special size and tolerance products; use of any other bit will cause inconsistent performance of the anchor (sold separately)
5/16" dia. UltraCon® Anchors have a silver Stalgard® finish.
Hex washer head anchors have a large 5/8" washer dia.
UltraCon® and Stalgard® are registered trademarks of Acument Intellectual Properties, LLC.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
1/2x2-1/2 Mas-Tap Hd Anchor
Couldn't load pickup availability
Masonry Anchor Phillips Head #14-10 x 2-3/4"
Couldn't load pickup availability
Drop-In Anchor Steel 1/2 x 2"
Couldn't load pickup availability
Machine Screw Steel Phillips Pan Head
Couldn't load pickup availability
Hex Cap Screw Class 8.8 Assortment
Couldn't load pickup availability
Self-Locking Washer Assortment Fractional 78Pcs
Couldn't load pickup availability
Masonry Anchor Hex Washer Head Steel 1/4 x 2-1/4"
Couldn't load pickup availability
Masonry Anchor TORX® Head Steel 3/16 x 3-3/4"
Couldn't load pickup availability
3/16X1-1/4 Chrome Ez-One Square Pan Hd
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 11.5 x 21
Couldn't load pickup availability
Front Bumper Specialty Nut Steel M4.2-1.41
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Product Description
UltraCon+® Anchors and Drill Bits• Fast installation – drill hole, drive anchor
• Anchors available in three head styles: Slotted hex washer head for most applications; Phillips flat head provides flush seating for countersunk applications; 5/16" hex washer head has an oversized (0.540") washer face
• Replaces expansion anchors, plugs and screws
• Hi-Lo threads provide exceptional holding strength with no spalling
• Notched cutting edges for easy installation – cuts threads into poured concrete, brick or hollow block
• Gimlet point for self drilling into wood base material
• Reversible and removable
• Stalgard®-coated for superior corrosion resistance – withstands a minimum of 800 hours of neutral salt-spray testing without evidence of red rust on significant surfaces
• Carbide-Tipped UltraCon® Masonry Hammer Drill Bits are required – these bits are special size and tolerance products; use of any other bit will cause inconsistent performance of the anchor (sold separately)
5/16" dia. UltraCon® Anchors have a silver Stalgard® finish.
Hex washer head anchors have a large 5/8" washer dia.
UltraCon® and Stalgard® are registered trademarks of Acument Intellectual Properties, LLC.
Technical Specifications
| Item#: | 60754 |
|---|---|
| Diameter | 5/16 " |
| Length | 2-3/4 " |
| Type | Screw Anchor |
| Material | Carbon Steel |
| Finish | Stalgard-Coated |
| For Material Thickness | 1-1/2 - 2 " |
| Head Style | Hex |
| UNSPSC #: | 31162104 |
| TAA Compliant: | Yes |
| Weight: | 2.24 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
