Masonry Anchor Phillips Head #14-10 x 3-1/4"
(Pack of
10)
Type 410 Stainless Steel anchors that cut threads into poured concrete, brick or hollow brick
Fast installation drill hole, drive anchor
Available in two head styles hex washer head for most applications and Phillips flat head for countersunk applications
Stalgard®-coated for superior corrosion resistance
To determine the proper length of Crete-Flex™ anchor for an application, combine the thickness of the attachment (A) with the desired depth of embedment in the masonry material (B). It is recommended that embedment never be less than 1", nor greater than 1-3/4".
NOTE: Use system drill bits. Use of any other drill bits will cause inconsistent performance of the anchors. Drill bits must be ordered separately.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together

Drill 'N Drive Masonry Anchor Kit 102Pcs
Couldn't load pickup availability

Self-Drilling Wallboard Mini Anchor Kit 51Pcs
Couldn't load pickup availability

SnapSkru® Self-Drilling Wall Anchor Kit 50Pcs
Couldn't load pickup availability

Hex Flange Bolt Grade 10.9 M10-1.25 x 35mm
Couldn't load pickup availability

Hex Flange Bolt Grade 10.9 M8-1.25 x 35mm
Couldn't load pickup availability

Hex Flange Bolt Grade 10.9 M10-1.25 x 25mm
Couldn't load pickup availability

Masonry Anchor TORX® Head Steel 3/16 x 4"
Couldn't load pickup availability

Masonry Anchor Hex Washer Head Steel 1/4 x 4"
Couldn't load pickup availability

Masonry Anchor Star Head Steel 1/4 x 2-1/4"
Couldn't load pickup availability

Bumper Radiator and Grille Drive Rivet 7mm Hole
Couldn't load pickup availability

Cowl Bumper Fender Liner/Engine Under Cover Rivet
Couldn't load pickup availability

Bumper Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Product Description
Type 410 Stainless Steel anchors that cut threads into poured concrete, brick or hollow brick Fast installation drill hole, drive anchor
Available in two head styles hex washer head for most applications and Phillips flat head for countersunk applications
Stalgard®-coated for superior corrosion resistance
To determine the proper length of Crete-Flex™ anchor for an application, combine the thickness of the attachment (A) with the desired depth of embedment in the masonry material (B). It is recommended that embedment never be less than 1", nor greater than 1-3/4".
NOTE: Use system drill bits. Use of any other drill bits will cause inconsistent performance of the anchors. Drill bits must be ordered separately.
Technical Specifications
Item#: | 59665 |
---|---|
Diameter | #14 |
Length | 3-1/4 " |
Type | Crete-Flex |
Material | Stainless Steel |
Finish | Plain |
Thread Pitch | 10 tpi |
Drive | Phillips |
Head Style | Phillips Flat Head |
Drive Style | Phillips |
UNSPSC #: | 31162104 |
TAA Compliant: | Yes |
Weight: | 0.38 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov


