Masonry Sleeve Anchor, Steel, Zinc Finish, 3/4 x 6-1/4"
(Pack of
5)
SKU:P34721 Item#: P34721
• Superior holding power in soft masonry applications such as cinder block, brick and sandstone
• High-strength alloy steel – resistant to shearing and elongation
• Full circumference gripping action for maximum strength – expansion shield flares out to produce a firm, stable anchor and full holding power even on abrasive or uneven surfaces
• Non-dishing flat washer provides full positive seating
• Drill and anchor diameter are the same size for easy installation
• Zinc-plated for corrosion resistance
• Anchors are pre-assembled and ready to use
• Effective on floors, walls and ceilings
NOTE: Holding power values are maximum. Always use a safety factor of at least 4:1.
Frequently Bought Together
Masonry Anchor Assortment 243Pcs
Couldn't load pickup availability
Wallboard Anchor Assortment 1125Pcs
Couldn't load pickup availability
Masonry Anchor Assortment 243Pcs
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 1/4-20
Couldn't load pickup availability
Open End Rivet Large Flange Head Aluminum 3/16"
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 40mm
Couldn't load pickup availability
Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
High-Tech Seam Sealer Clear 5fl.oz
Couldn't load pickup availability
Fender Splash Shield Push Rivet Nylon 7mm Hole
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 3/8 x 2-3/4"
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 1/2 x 2-1/4"
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 1/4 x 1-3/8"
Couldn't load pickup availability
Product Description
• Superior holding power in soft masonry applications such as cinder block, brick and sandstone• High-strength alloy steel – resistant to shearing and elongation
• Full circumference gripping action for maximum strength – expansion shield flares out to produce a firm, stable anchor and full holding power even on abrasive or uneven surfaces
• Non-dishing flat washer provides full positive seating
• Drill and anchor diameter are the same size for easy installation
• Zinc-plated for corrosion resistance
• Anchors are pre-assembled and ready to use
• Effective on floors, walls and ceilings
NOTE: Holding power values are maximum. Always use a safety factor of at least 4:1.
Technical Specifications
| Item#: | P34721 |
|---|---|
| Length | 6-1/4 " |
| Type | Sleeve-Type Stud Bolt Anchor |
| Material | Carbon Steel |
| Maximum Fastened Material Thickness | 3-3/4 " |
| Size | 3/4X6-1/4 " |
| Diameter | 3/4 " |
| Stud Size | 5/8 " |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 4.15 lb |
