Masonry Sleeve Anchor, Steel, Zinc Finish, 5/16 x 2-1/2"
(Pack of
50)
SKU:P34661 Item#: P34661
• Superior holding power in soft masonry applications such as cinder block, brick and sandstone
• High-strength alloy steel – resistant to shearing and elongation
• Full circumference gripping action for maximum strength – expansion shield flares out to produce a firm, stable anchor and full holding power even on abrasive or uneven surfaces
• Non-dishing flat washer provides full positive seating
• Drill and anchor diameter are the same size for easy installation
• Zinc-plated for corrosion resistance
• Anchors are pre-assembled and ready to use
• Effective on floors, walls and ceilings
NOTE: Holding power values are maximum. Always use a safety factor of at least 4:1.
Frequently Bought Together
Masonry Anchor Phillips Head #14-10 x 2-1/4"
Couldn't load pickup availability
Lag Screw Shield Anchor Long Style 3/8 x 2-1/2"
Couldn't load pickup availability
Double Expansion Shield Anchor Alloy Steel 5/8"
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
Hammerlock Cotter Pin Kit 140Pcs
Couldn't load pickup availability
Hex Nut Grade 5 Steel 3/8-16
Couldn't load pickup availability
Front Bumper and Radiator Support Drive Rivet
Couldn't load pickup availability
Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability
Air Distributor Defroster Push-Type Retainer
Couldn't load pickup availability
Masonry Sleeve Anchor Steel 5/16 x 1-1/2"
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 5/16 x 2-1/2"
Couldn't load pickup availability
Masonry Sleeve Anchor Steel 1/4 x 1-3/8"
Couldn't load pickup availability
Product Description
• Superior holding power in soft masonry applications such as cinder block, brick and sandstone• High-strength alloy steel – resistant to shearing and elongation
• Full circumference gripping action for maximum strength – expansion shield flares out to produce a firm, stable anchor and full holding power even on abrasive or uneven surfaces
• Non-dishing flat washer provides full positive seating
• Drill and anchor diameter are the same size for easy installation
• Zinc-plated for corrosion resistance
• Anchors are pre-assembled and ready to use
• Effective on floors, walls and ceilings
NOTE: Holding power values are maximum. Always use a safety factor of at least 4:1.
Technical Specifications
| Item#: | P34661 |
|---|---|
| Length | 2-1/2 " |
| Type | Sleeve-Type Stud Bolt Anchor |
| Material | Carbon Steel |
| Maximum Fastened Material Thickness | 1-1/2 " |
| Size | 5/16X2-1/2 " |
| Diameter | 5/16 " |
| Stud Size | 1/4 " |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 3.0 lb |
