Home Automotive Hardware Micro Paint Applicator and Remover Non Linting
Automotive Hardware
DV_ZoomOriginal_I_60893.jpg
DV_ZoomOriginal_I_60893_CP1.jpg
DV_ZoomOriginal_I_60893.jpg
DV_ZoomOriginal_I_60893_CP1.jpg

Micro Paint Applicator and Remover, Non Linting, Non Absorbent Fibers, Place or Remove the Smallest Drops of Paint
(Pack of 25)

Kent Automotive

• Place or remove the smallest drops of paint, cleaner or lubricant from vehicle surface without damaging the finish
• Bendable to reach the most difficult locations
• Non-linting, non-absorbent fibers

Read More
Check Availability

California Proposition 65: Not Applicable
www.P65Warnings.ca.gov

Catalog page#: 6-366, 10-8

Frequently Bought Together

DV_ZoomOriginal_I_P85218.jpg

Molding Clip with Sealer Nylon White 10 x 12mm

Item#: P85218
DV_ZoomOriginal_I_P13787.jpg

Wheel Opening Drive Rivet Aluminum 5/32"

Item#: P13787
DV_ZoomOriginal_I_1482003.jpg

Front Bumper Push-Type Retainer Nylon 10mm

Item#: 1482003
DV_ZoomOriginal_I_KT14602.jpg

Plastic Spreader 4"

Item#: KT14602
DV_ZoomOriginal_P_AT04052018_WB.jpg

Thin Wiggle Wire 16 AWG

Item#: 1556087
DV_ZoomOriginal_P_AT04052018_WB.jpg

Thick Wiggle Wire 12 AWG

Item#: 1556086
DV_ZoomOriginal_I_P85218.jpg

Molding Clip with Sealer Nylon White 10 x 12mm

Item#: P85218
DV_ZoomOriginal_I_P13787.jpg

Wheel Opening Drive Rivet Aluminum 5/32"

Item#: P13787
DV_ZoomOriginal_I_1482003.jpg

Front Bumper Push-Type Retainer Nylon 10mm

Item#: 1482003
DV_ZoomOriginal_I_KT13537.jpg

Front Bumper and Radiator Support Drive Rivet

Item#: KT13537
DV_ZoomOriginal_I_P23453.jpg

Push-Type Retainer Nylon 20mm

Item#: P23453
DV_ZoomOriginal_I_P20153.jpg

Front License Plate to Bumper Cover Split Rivet

Item#: P20153
DV_ZoomOriginal_I_KT14602.jpg

Plastic Spreader 4"

Item#: KT14602
DV_ZoomOriginal_P_AT04052018_WB.jpg

Thin Wiggle Wire 16 AWG

Item#: 1556087
DV_ZoomOriginal_P_AT04052018_WB.jpg

Thick Wiggle Wire 12 AWG

Item#: 1556086

Product Description

• Place or remove the smallest drops of paint, cleaner or lubricant from vehicle surface without damaging the finish
• Bendable to reach the most difficult locations
• Non-linting, non-absorbent fibers

Technical Specifications

Item#: 60893
Material Non linting, non absorbent fibers
Description Micro Paint Applicator and Remover
UNSPSC #: 78181500
TAA Compliant: Yes
Weight: 0.02 lb

Product Restrictions

California Proposition 65: Not Applicable
www.P65Warnings.ca.gov

Suggested Products

DV_ZoomOriginal_I_P23263.jpg

Rear Bumper Cover Retainer Plastic 18mm

Item#: P23263
DV_ZoomOriginal_I_1404768.jpg

Bumper and Wheel Well Liner Push-Type Retainer

Item#: 1404768
DV_ZoomOriginal_I_KT13998.jpg

Engine Under Cover Drive Rivet Plastic 7mm Hole

Item#: KT13998
DV_ZoomOriginal_I_KT13747.jpg

Bumper Fascia General Purpose Split Rivet 3/16"

Item#: KT13747
DV_ZoomOriginal_I_1365427.jpg

Fender Apron Drive Rivet 8mm Hole

Item#: 1365427
DV_ZoomOriginal_I_KT11397.jpg

Front Fender Push-Type Retainer Nylon 20mm

Item#: KT11397
DV_ZoomOriginal_I_P62445.jpg

Fender Bumper Shield Retainer 11/16"

Item#: P62445
DV_ZoomOriginal_I_1500739.jpg

Drive Rivet Nylon M8

Item#: 1500739
DV_ZoomOriginal_I_1089482.jpg

Woven Polyester Electrical Tape 19mm x 25m

Item#: 1089482
DV_ZoomOriginal_I_KT11528.jpg

Inner Fender Shield Attaching Clip Nylon Black

Item#: P27685
DV_ZoomOriginal_I_P85262.jpg

Bumper Radiator and Grille Drive Rivet 7mm Hole

Item#: P85262
DV_ZoomOriginal_I_P86111.jpg

Cowl Bumper Fender Liner/Engine Under Cover Rivet

Item#: P86111

Your Recently Viewed Items