Narrow Face Crimped Wire Wheel 6"
(Pack of
1.0)
• Outlast standard brushes by at least 2-to-1
• High tensile, heat-treated wire for excellent fatigue resistance and fast cutting capabilities
• Provide continuous cutting action, uniform surface contaminant removal and a smooth finish
• Quality is continuously checked during the manufacturing process; brush samples must remain 100% intact when tested at 120% of their rated operating speed
• Unique manufacturing process neatly arranges wire so each tuft contains the same count
• Wire springs back and is consistently crimped and cut to precise length
• Filaments are securely held in place with a solid steel retaining ring
• Use for roughening for adhesion, surface preparation prior to plating or painting, edge blending, cleaning off rust, scale and dirt, finishing for appearance, and deburring
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Catalog page#: 10-63
Frequently Bought Together
Tube Brush Holder 3/32"
Couldn't load pickup availability
Narrow Face Crimped Wire Wheel 8"
Couldn't load pickup availability
Stringer Wire Wheel 4"Dia., .020" Wire Dia., 5/8"-11 Arbor
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-3/4" (M8)
Couldn't load pickup availability
Cryobit 1/8" Dia. Maintenance Drill Bit , 135o Split Point, No Flats
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
Couldn't load pickup availability
Bumper Radiator and Grille Drive Rivet 7mm Hole
Couldn't load pickup availability
Cowl Bumper Fender Liner/Engine Under Cover Rivet
Couldn't load pickup availability
Nylon Cable Tie 15-1/4" Black
Couldn't load pickup availability
Razor Blade Single Edge w/Notch
Couldn't load pickup availability
Nutsetter & Bit Set, Magnetic, 22pc
Couldn't load pickup availability
8Pc Metric Flare Nut Wrench Set
Couldn't load pickup availability
Medium Face Crimped Wire Wheel 7"
Couldn't load pickup availability
ConFlex Encapsulated Wire Wheel 2"
Couldn't load pickup availability
Narrow Face Crimped Wire Wheel 4"
Couldn't load pickup availability
Product Description
• Outlast standard brushes by at least 2-to-1• High tensile, heat-treated wire for excellent fatigue resistance and fast cutting capabilities
• Provide continuous cutting action, uniform surface contaminant removal and a smooth finish
• Quality is continuously checked during the manufacturing process; brush samples must remain 100% intact when tested at 120% of their rated operating speed
• Unique manufacturing process neatly arranges wire so each tuft contains the same count
• Wire springs back and is consistently crimped and cut to precise length
• Filaments are securely held in place with a solid steel retaining ring
• Use for roughening for adhesion, surface preparation prior to plating or painting, edge blending, cleaning off rust, scale and dirt, finishing for appearance, and deburring
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
| Item#: | 89184 |
|---|---|
| Type | Crimped |
| Style | Narrow Face |
| Material | Steel |
| O.D. | 6 " |
| Arbor Size | 1/2, 5/8 " |
| Wire Gauge | 0.014 " |
| Maximum RPM | 6,000 |
| Face Width | 3/4 " |
| UNSPSC #: | 27111907 |
| TAA Compliant: | Yes |
| Weight: | 0.94 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
