S62 Water Based Epoxy Coating Satin Deep Base 1 Gallon
(Pack of
2)
SKU:1710427 Item#: 1710427
This water-based formula contains low VOCs, low HAPs1 and low solvent odor and creates a tough, high-gloss finish.
• High-performance coating-ideal for surfaces that are subjected to frequent wash-downs
• Impervious to moisture; easily cleaned and sanitized
• Dries fast-30 minutes to touch, return to service in 24 hours
• Easy-to-use, two-component system order tint base and activator separately
• Satin finishes represent sierra s62 system
• Practical Coverage at Recommended DFT: 230 - 340 sq. ft./gal. (5.7 - 8.4 m²/l)
• Practical Coverage at Recommended DFT for Color Finishes: 135 - 195 sq. ft./gal. (3.3 - 4.8 m²/l)
• Practical Coverage at Recommended DFT for Clear Finishes: 225 - 340 sq. ft./gal. (5.5 - 8.4 m²/l)
• Dry Times at 70 - 80°F (21 - 27°C) and 50% Relative Humidity - Tack Free: 15 - 45 minutes
• Dry Times at 70 - 80°F (21 - 27°C) and 50% Relative Humidity - Dries Hard: 1.5 - 2 hours
• Dry Times at 70 - 80°F (21 - 27°C) and 50% Relative Humidity - Recoat: 1 - 3 hours, clear finishes must dry to the point where the coating is free of any remaining milkiness before recoating. If recoat time exceeds 72 hours, scuff sand prior to recoating
• Dry Times at 70 - 80°F (21 - 27°C) and 50% Relative Humidity - Foot Traffic: Light Foot Traffic: 3 hours; Normal Foot Traffic: 3 hours
• Dry Times at 70 - 80°F (21 - 27°C) and 50% Relative Humidity - Full Traffic: 72 hours, full chemical resistance will take 10 - 14 days
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Glass Kleen HD
$0.00
Couldn't load pickup availability
Square Turbo Mixer 21 Element with Integrated Nut
$0.00
Couldn't load pickup availability
Flex-E-6000 Seam Sealer with Turbo Mixer
$0.00
Couldn't load pickup availability
Crash Wrap Plastic Film Roll 5mil x 200'
$0.00
Couldn't load pickup availability
Euro-Blackâ„¢ Flat Finish 15oz
$0.00
Couldn't load pickup availability
Rubber Guard Rubber Coating 17.75oz
$0.00
Couldn't load pickup availability
5800 Floor Coating WB PolyUrethane Matte Clear 1 Gallon Kit
$0.00
Couldn't load pickup availability
Floor Durability Concrete Additive 1/2 Pound
$0.00
Couldn't load pickup availability
S62 Water Based Maintenance Coating Gloss Stone Gray 1 Gallon
$0.00
Couldn't load pickup availability
Bumper Radiator and Grille Drive Rivet 7mm Hole
$0.00
Couldn't load pickup availability
Push-Type Retainer Nylon 16 x 19mm
$0.00
Couldn't load pickup availability
Bumper Fascia General Purpose Split Rivet 3/16"
$0.00
Couldn't load pickup availability
Product Description
This water-based formula contains low VOCs, low HAPs1 and low solvent odor and creates a tough, high-gloss finish.• High-performance coating-ideal for surfaces that are subjected to frequent wash-downs
• Impervious to moisture; easily cleaned and sanitized
• Dries fast-30 minutes to touch, return to service in 24 hours
• Easy-to-use, two-component system order tint base and activator separately
• Satin finishes represent sierra s62 system
• Practical Coverage at Recommended DFT: 230 - 340 sq. ft./gal. (5.7 - 8.4 m²/l)
• Practical Coverage at Recommended DFT for Color Finishes: 135 - 195 sq. ft./gal. (3.3 - 4.8 m²/l)
• Practical Coverage at Recommended DFT for Clear Finishes: 225 - 340 sq. ft./gal. (5.5 - 8.4 m²/l)
• Dry Times at 70 - 80°F (21 - 27°C) and 50% Relative Humidity - Tack Free: 15 - 45 minutes
• Dry Times at 70 - 80°F (21 - 27°C) and 50% Relative Humidity - Dries Hard: 1.5 - 2 hours
• Dry Times at 70 - 80°F (21 - 27°C) and 50% Relative Humidity - Recoat: 1 - 3 hours, clear finishes must dry to the point where the coating is free of any remaining milkiness before recoating. If recoat time exceeds 72 hours, scuff sand prior to recoating
• Dry Times at 70 - 80°F (21 - 27°C) and 50% Relative Humidity - Foot Traffic: Light Foot Traffic: 3 hours; Normal Foot Traffic: 3 hours
• Dry Times at 70 - 80°F (21 - 27°C) and 50% Relative Humidity - Full Traffic: 72 hours, full chemical resistance will take 10 - 14 days
Technical Specifications
| Item#: | 1710427 |
|---|---|
| Manufacturer Model #: | 282601 |
| Type | Water-Based Epoxy Maintenance Coating |
| Container Type | Can |
| Size | 1 gal |
| Color | Deep Tint Base |
| Coverage | 225-340 ft² |
| Physical Form | Liquid |
| Work Time | 15 h |
| Cure Time | 10-14 h |
| UNSPSC #: | 31201710 |
| TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
